Jump to content
  • 0

Errores del tipo "failed command: READ FPDMA QUEUED"


Mgbu
 Share

Question

Tengo una notebook Acer Aspire M5 con Debian Testing, Linux Mint y Windows 8

 

Mientras inicio en Debian Testing me larga varios errores. Que yo sepa son los mismos que me muetra cuando hago dmesg, así que paso la salida de dmesg:

 

 

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=c05302c7-f6cc-4485-94fa-c561892b367c ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a0daffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a0db0000-0x00000000a21affff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a21b0000-0x00000000a67befff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a67bf000-0x00000000a68e7fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a68e8000-0x00000000a68e8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a68e9000-0x00000000a68f2fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a68f3000-0x00000000a68f3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a68f4000-0x00000000a68fafff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a68fb000-0x00000000a68fbfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a68fc000-0x00000000a6911fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a6912000-0x00000000a6912fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6913000-0x00000000a6917fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a6918000-0x00000000a6918fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6919000-0x00000000a6926fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a6927000-0x00000000a6927fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6928000-0x00000000a692cfff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a692d000-0x00000000a692dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a692e000-0x00000000a69befff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a69bf000-0x00000000a6ebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by INSYDE Corp.
[    0.000000] efi:  ACPI=0xa6ffe000  ACPI 2.0=0xa6ffe014  SMBIOS=0xa6ebef98 
[    0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[    0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB)
[    0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[    0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[    0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001016000) (15MB)
[    0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000001016000-0x0000000001200000) (1MB)
[    0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001200000-0x0000000002116000) (15MB)
[    0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000002116000-0x0000000020000000) (478MB)
[    0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[    0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x0000000036456000) (354MB)
[    0.000000] efi: mem11: type=2, attr=0xf, range=[0x0000000036456000-0x0000000037223000) (13MB)
[    0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000037223000-0x0000000040004000) (141MB)
[    0.000000] efi: mem13: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[    0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000040005000-0x0000000076cb0000) (876MB)
[    0.000000] efi: mem15: type=2, attr=0xf, range=[0x0000000076cb0000-0x000000009f1c0000) (645MB)
[    0.000000] efi: mem16: type=4, attr=0xf, range=[0x000000009f1c0000-0x000000009f1e0000) (0MB)
[    0.000000] efi: mem17: type=7, attr=0xf, range=[0x000000009f1e0000-0x000000009fd78000) (11MB)
[    0.000000] efi: mem18: type=2, attr=0xf, range=[0x000000009fd78000-0x000000009ff4c000) (1MB)
[    0.000000] efi: mem19: type=4, attr=0xf, range=[0x000000009ff4c000-0x00000000a0db0000) (14MB)
[    0.000000] efi: mem20: type=0, attr=0xf, range=[0x00000000a0db0000-0x00000000a21b0000) (20MB)
[    0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000a21b0000-0x00000000a21bd000) (0MB)
[    0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000a21bd000-0x00000000a21bf000) (0MB)
[    0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000a21bf000-0x00000000a228b000) (0MB)
[    0.000000] efi: mem24: type=1, attr=0xf, range=[0x00000000a228b000-0x00000000a23bf000) (1MB)
[    0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000a23bf000-0x00000000a3a8d000) (22MB)
[    0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000a3a8d000-0x00000000a3f0e000) (4MB)
[    0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000a3f0e000-0x00000000a3fb2000) (0MB)
[    0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000a3fb2000-0x00000000a4408000) (4MB)
[    0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000a4408000-0x00000000a440d000) (0MB)
[    0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000a440d000-0x00000000a440f000) (0MB)
[    0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000a440f000-0x00000000a4411000) (0MB)
[    0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000a4411000-0x00000000a4446000) (0MB)
[    0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000a4446000-0x00000000a444b000) (0MB)
[    0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000a444b000-0x00000000a4455000) (0MB)
[    0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000a4455000-0x00000000a4456000) (0MB)
[    0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000a4456000-0x00000000a447c000) (0MB)
[    0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000a447c000-0x00000000a447e000) (0MB)
[    0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000a447e000-0x00000000a45a8000) (1MB)
[    0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000a45a8000-0x00000000a45ad000) (0MB)
[    0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000a45ad000-0x00000000a45b0000) (0MB)
[    0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000a45b0000-0x00000000a45b1000) (0MB)
[    0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000a45b1000-0x00000000a45f5000) (0MB)
[    0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000a45f5000-0x00000000a4659000) (0MB)
[    0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000a4659000-0x00000000a465b000) (0MB)
[    0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000a465b000-0x00000000a465c000) (0MB)
[    0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000a465c000-0x00000000a46e2000) (0MB)
[    0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000a46e2000-0x00000000a46e3000) (0MB)
[    0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000a46e3000-0x00000000a49e2000) (2MB)
[    0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000a49e2000-0x00000000a49ec000) (0MB)
[    0.000000] efi: mem50: type=4, attr=0xf, range=[0x00000000a49ec000-0x00000000a63bf000) (25MB)
[    0.000000] efi: mem51: type=7, attr=0xf, range=[0x00000000a63bf000-0x00000000a64d3000) (1MB)
[    0.000000] efi: mem52: type=2, attr=0xf, range=[0x00000000a64d3000-0x00000000a64df000) (0MB)
[    0.000000] efi: mem53: type=3, attr=0xf, range=[0x00000000a64df000-0x00000000a67bf000) (2MB)
[    0.000000] efi: mem54: type=5, attr=0x800000000000000f, range=[0x00000000a67bf000-0x00000000a68da000) (1MB)
[    0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000a68da000-0x00000000a68e8000) (0MB)
[    0.000000] efi: mem56: type=6, attr=0x800000000000000f, range=[0x00000000a68e8000-0x00000000a68e9000) (0MB)
[    0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000a68e9000-0x00000000a68f3000) (0MB)
[    0.000000] efi: mem58: type=6, attr=0x800000000000000f, range=[0x00000000a68f3000-0x00000000a68f4000) (0MB)
[    0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000a68f4000-0x00000000a68fb000) (0MB)
[    0.000000] efi: mem60: type=6, attr=0x800000000000000f, range=[0x00000000a68fb000-0x00000000a68fc000) (0MB)
[    0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000a68fc000-0x00000000a6912000) (0MB)
[    0.000000] efi: mem62: type=6, attr=0x800000000000000f, range=[0x00000000a6912000-0x00000000a6913000) (0MB)
[    0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000a6913000-0x00000000a6918000) (0MB)
[    0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x00000000a6918000-0x00000000a6919000) (0MB)
[    0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000a6919000-0x00000000a6927000) (0MB)
[    0.000000] efi: mem66: type=6, attr=0x800000000000000f, range=[0x00000000a6927000-0x00000000a6928000) (0MB)
[    0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000a6928000-0x00000000a692d000) (0MB)
[    0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x00000000a692d000-0x00000000a692e000) (0MB)
[    0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000a692e000-0x00000000a69bf000) (0MB)
[    0.000000] efi: mem70: type=6, attr=0x800000000000000f, range=[0x00000000a69bf000-0x00000000a6abf000) (1MB)
[    0.000000] efi: mem71: type=0, attr=0xf, range=[0x00000000a6abf000-0x00000000a6bc8000) (1MB)
[    0.000000] efi: mem72: type=0, attr=0xf, range=[0x00000000a6bc8000-0x00000000a6ebf000) (2MB)
[    0.000000] efi: mem73: type=10, attr=0xf, range=[0x00000000a6ebf000-0x00000000a6fa2000) (0MB)
[    0.000000] efi: mem74: type=10, attr=0xf, range=[0x00000000a6fa2000-0x00000000a6fbf000) (0MB)
[    0.000000] efi: mem75: type=9, attr=0xf, range=[0x00000000a6fbf000-0x00000000a6fdb000) (0MB)
[    0.000000] efi: mem76: type=9, attr=0xf, range=[0x00000000a6fdb000-0x00000000a6fff000) (0MB)
[    0.000000] efi: mem77: type=4, attr=0xf, range=[0x00000000a6fff000-0x00000000a7000000) (0MB)
[    0.000000] efi: mem78: type=7, attr=0xf, range=[0x0000000100000000-0x000000014f600000) (1270MB)
[    0.000000] efi: mem79: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[    0.000000] efi: mem80: type=0, attr=0x0, range=[0x00000000a7000000-0x00000000afa00000) (138MB)
[    0.000000] efi: mem81: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[    0.000000] efi: mem82: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[    0.000000] efi: mem83: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[    0.000000] efi: mem84: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[    0.000000] efi: mem85: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[    0.000000] efi: mem86: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[    0.000000] efi: mem87: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000fff12000) (3MB)
[    0.000000] efi: mem88: type=11, attr=0x8000000000000000, range=[0x00000000fff12000-0x00000000fff40000) (0MB)
[    0.000000] efi: mem89: type=11, attr=0x8000000000000000, range=[0x00000000fff40000-0x0000000100000000) (0MB)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Acer Aspire M5-481T/MA40_HX, BIOS V2.11 11/02/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 0A0000000 mask FFC000000 write-back
[    0.000000]   3 base 0A4000000 mask FFE000000 write-back
[    0.000000]   4 base 0A6000000 mask FFF000000 write-back
[    0.000000]   5 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   6 base 100000000 mask F80000000 write-back
[    0.000000]   7 base 14F600000 mask FFFE00000 uncachable
[    0.000000]   8 base 14F800000 mask FFF800000 uncachable
[    0.000000]   9 base 150000000 mask FF0000000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff88000007c000] 7c000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01cf2000, 0x01cf2fff] PGTABLE
[    0.000000] BRK [0x01cf3000, 0x01cf3fff] PGTABLE
[    0.000000] BRK [0x01cf4000, 0x01cf4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x14f400000-0x14f5fffff]
[    0.000000]  [mem 0x14f400000-0x14f5fffff] page 2M
[    0.000000] BRK [0x01cf5000, 0x01cf5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14f3fffff]
[    0.000000]  [mem 0x14c000000-0x14f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
[    0.000000]  [mem 0x100000000-0x14bffffff] page 2M
[    0.000000] BRK [0x01cf6000, 0x01cf6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01cf7000, 0x01cf7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0xa0daffff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0xa0bfffff] page 2M
[    0.000000]  [mem 0xa0c00000-0xa0daffff] page 4k
[    0.000000] init_memory_mapping: [mem 0xa21b0000-0xa67befff]
[    0.000000]  [mem 0xa21b0000-0xa21fffff] page 4k
[    0.000000]  [mem 0xa2200000-0xa65fffff] page 2M
[    0.000000]  [mem 0xa6600000-0xa67befff] page 4k
[    0.000000] init_memory_mapping: [mem 0xa6fff000-0xa6ffffff]
[    0.000000]  [mem 0xa6fff000-0xa6ffffff] page 4k
[    0.000000] RAMDISK: [mem 0x36456000-0x37222fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000A6FFE014 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x00000000A6FFE210 0000A4 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000A6FFB000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DSDT 0x00000000A6FEC000 00B22C (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: FACS 0x00000000A6FBA000 000040
[    0.000000] ACPI: UEFI 0x00000000A6FFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASF! 0x00000000A6FFC000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: HPET 0x00000000A6FFA000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: APIC 0x00000000A6FF9000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MCFG 0x00000000A6FF8000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SLIC 0x00000000A6FEB000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: WDAT 0x00000000A6FEA000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000A6FE8000 001068 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: BOOT 0x00000000A6FE6000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASPT 0x00000000A6FE1000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: FPDT 0x00000000A6FDF000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MSDM 0x00000000A6FDE000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000A6FDD000 0008E4 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000A6FDC000 000A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: BGRT 0x00000000A6FDB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x14f5fffff]
[    0.000000]   NODE_DATA [mem 0x14f5f5000-0x14f5f9fff]
[    0.000000]  [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014ae00000-ffff88014e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x14f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00087fff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0xa0daffff]
[    0.000000]   node   0: [mem 0xa21b0000-0xa67befff]
[    0.000000]   node   0: [mem 0xa6fff000-0xa6ffffff]
[    0.000000]   node   0: [mem 0x100000000-0x14f5fffff]
[    0.000000] On node 0 totalpages: 1001286
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 24 pages reserved
[    0.000000]   DMA zone: 3975 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9191 pages used for memmap
[    0.000000]   DMA32 zone: 672191 pages, LIFO batch:31
[    0.000000]   Normal zone: 4445 pages used for memmap
[    0.000000]   Normal zone: 325120 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xa7a00000-0xaf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0db0000-0xa21affff]
[    0.000000] PM: Registered nosave memory: [mem 0xa67bf000-0xa68e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68e8000-0xa68e8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68e9000-0xa68f2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68f3000-0xa68f3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68f4000-0xa68fafff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68fb000-0xa68fbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68fc000-0xa6911fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6912000-0xa6912fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6913000-0xa6917fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6918000-0xa6918fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6919000-0xa6926fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6927000-0xa6927fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6928000-0xa692cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xa692d000-0xa692dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xa692e000-0xa69befff]
[    0.000000] PM: Registered nosave memory: [mem 0xa69bf000-0xa6ebefff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6ebf000-0xa6fbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6fbf000-0xa6ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xa7000000-0xaf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88014f200000 s81792 r8192 d20608 u262144
[    0.000000] pcpu-alloc: s81792 r8192 d20608 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 987570
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=c05302c7-f6cc-4485-94fa-c561892b367c ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3796312K/4005144K available (5201K kernel code, 943K rwdata, 1828K rodata, 1200K init, 840K bss, 208832K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1795.912 MHz processor
[    0.000047] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.82 BogoMIPS (lpj=7183648)
[    0.000050] pid_max: default: 32768 minimum: 301
[    0.000061] ACPI: Core revision 20140424
[    0.010069] ACPI: All ACPI Tables successfully acquired
[    0.034704] Security Framework initialized
[    0.034717] AppArmor: AppArmor disabled by boot time parameter
[    0.034718] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.035060] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.036508] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.037153] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.037160] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.037432] Initializing cgroup subsys memory
[    0.037439] Initializing cgroup subsys devices
[    0.037447] Initializing cgroup subsys freezer
[    0.037450] Initializing cgroup subsys net_cls
[    0.037455] Initializing cgroup subsys blkio
[    0.037460] Initializing cgroup subsys perf_event
[    0.037463] Initializing cgroup subsys net_prio
[    0.037494] CPU: Physical Processor ID: 0
[    0.037496] CPU: Processor Core ID: 0
[    0.037501] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.037505] mce: CPU supports 7 MCE banks
[    0.037521] CPU0: Thermal monitoring enabled (TM1)
[    0.037531] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[    0.037680] Freeing SMP alternatives memory: 20K (ffffffff81a19000 - ffffffff81a1e000)
[    0.041465] ftrace: allocating 21587 entries in 85 pages
[    0.054495] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.094168] smpboot: CPU0: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (fam: 06, model: 3a, stepping: 09)
[    0.094177] TSC deadline timer enabled
[    0.094209] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.094236] ... version:                3
[    0.094237] ... bit width:              48
[    0.094239] ... generic registers:      4
[    0.094240] ... value mask:             0000ffffffffffff
[    0.094241] ... max period:             0000ffffffffffff
[    0.094242] ... fixed-purpose events:   3
[    0.094243] ... event mask:             000000070000000f
[    0.096242] x86: Booting SMP configuration:
[    0.096245] .... node  #0, CPUs:      #1
[    0.109408] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.109541]  #2 #3
[    0.135862] x86: Booted up 1 node, 4 CPUs
[    0.135866] smpboot: Total of 4 processors activated (14367.29 BogoMIPS)
[    0.140047] devtmpfs: initialized
[    0.143618] PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes)
[    0.144788] pinctrl core: initialized pinctrl subsystem
[    0.144891] NET: Registered protocol family 16
[    0.145039] cpuidle: using governor ladder
[    0.145043] cpuidle: using governor menu
[    0.145097] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.145099] ACPI: bus type PCI registered
[    0.145101] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.145224] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.145227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.145628] PCI: Using configuration type 1 for base access
[    0.156422] ACPI: Added _OSI(Module Device)
[    0.156425] ACPI: Added _OSI(Processor Device)
[    0.156427] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.156429] ACPI: Added _OSI(Processor Aggregator Device)
[    0.159542] ACPI: Executed 1 blocks of module-level executable AML code
[    0.174670] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.175518] ACPI: Dynamic OEM Table Load:
[    0.175531] ACPI: SSDT 0xFFFF88014A253000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20111123)
[    0.192204] ACPI: Dynamic OEM Table Load:
[    0.192215] ACPI: SSDT 0xFFFF880149C0BC00 000303 (v01 PmRef  ApIst    00003000 INTL 20111123)
[    0.206760] ACPI: Dynamic OEM Table Load:
[    0.206769] ACPI: SSDT 0xFFFF88014E83BE00 000119 (v01 PmRef  ApCst    00003000 INTL 20111123)
[    0.226788] ACPI: Interpreter enabled
[    0.226798] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.226804] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.226824] ACPI: (supports S0 S3 S4 S5)
[    0.226826] ACPI: Using IOAPIC for interrupt routing
[    0.226861] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.233064] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.233071] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.233236] \_SB_.PCI0:_OSC invalid UUID
[    0.233237] _OSC request data:1 1f 0 
[    0.233242] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.233995] PCI host bridge to bus 0000:00
[    0.233999] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.234002] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.234004] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.234006] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.234008] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
[    0.234018] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.234129] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.234144] pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc23fffff 64bit]
[    0.234152] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.234159] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.234288] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.234316] pci 0000:00:14.0: reg 0x10: [mem 0xc2600000-0xc260ffff 64bit]
[    0.234398] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.234445] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.234504] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.234531] pci 0000:00:16.0: reg 0x10: [mem 0xc2614000-0xc261400f 64bit]
[    0.234617] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.234727] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.235023] pci 0000:00:1a.0: reg 0x10: [mem 0xc2619000-0xc26193ff]
[    0.236676] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.236744] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.236804] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.236827] pci 0000:00:1b.0: reg 0x10: [mem 0xc2610000-0xc2613fff 64bit]
[    0.236915] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.236964] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.237016] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.237114] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.237165] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.237218] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.237314] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.237366] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.237419] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.237516] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.237567] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.237626] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[    0.237722] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.237772] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.237830] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.238116] pci 0000:00:1d.0: reg 0x10: [mem 0xc2618000-0xc26183ff]
[    0.239763] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.239827] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.239885] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.240095] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.240119] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
[    0.240130] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
[    0.240139] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
[    0.240149] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
[    0.240159] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.240170] pci 0000:00:1f.2: reg 0x24: [mem 0xc2617000-0xc26177ff]
[    0.240224] pci 0000:00:1f.2: PME# supported from D3hot
[    0.240316] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.240337] pci 0000:00:1f.3: reg 0x10: [mem 0xc2615000-0xc26150ff 64bit]
[    0.240361] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.240540] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.240656] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
[    0.240684] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.240867] pci 0000:03:00.0: supports D1 D2
[    0.240869] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[    0.240908] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.240979] pci 0000:03:00.1: [10ec:5209] type 00 class 0x080500
[    0.241006] pci 0000:03:00.1: reg 0x10: [mem 0x00000000-0x000000ff]
[    0.241182] pci 0000:03:00.1: supports D1 D2
[    0.241183] pci 0000:03:00.1: PME# supported from D1 D2 D3hot
[    0.248021] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.248027] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.248032] pci 0000:00:1c.1:   bridge window [mem 0xc1000000-0xc1ffffff]
[    0.248040] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.248189] pci 0000:04:00.0: [14e4:1692] type 00 class 0x020000
[    0.248228] pci 0000:04:00.0: reg 0x10: [mem 0xc2500000-0xc250ffff 64bit]
[    0.248443] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    0.248495] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.256043] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.256051] pci 0000:00:1c.2:   bridge window [mem 0xc2500000-0xc25fffff]
[    0.256161] pci 0000:09:00.0: [168c:0034] type 00 class 0x028000
[    0.256194] pci 0000:09:00.0: reg 0x10: [mem 0xc2400000-0xc247ffff 64bit]
[    0.256264] pci 0000:09:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.256357] pci 0000:09:00.0: supports D1 D2
[    0.256359] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.256396] pci 0000:09:00.0: System wakeup disabled by ACPI
[    0.264019] pci 0000:00:1c.7: PCI bridge to [bus 09]
[    0.264027] pci 0000:00:1c.7:   bridge window [mem 0xc2400000-0xc24fffff]
[    0.264617] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.264686] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.264750] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.264812] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.264875] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.264937] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.264999] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.265061] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.265294] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.265547] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.265680] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.265682] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.265686] vgaarb: loaded
[    0.265687] vgaarb: bridge control possible 0000:00:02.0
[    0.265890] PCI: Using ACPI for IRQ routing
[    0.273324] PCI: pci_cache_line_size set to 64 bytes
[    0.273459] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.273461] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.273463] e820: reserve RAM buffer [mem 0xa0db0000-0xa3ffffff]
[    0.273464] e820: reserve RAM buffer [mem 0xa67bf000-0xa7ffffff]
[    0.273468] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
[    0.273470] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
[    0.273652] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.273658] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.275691] Switched to clocksource hpet
[    0.281881] pnp: PnP ACPI init
[    0.281902] ACPI: bus type PNP registered
[    0.282059] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.282062] system 00:00: [io  0x1100-0x110f] has been reserved
[    0.282065] system 00:00: [io  0xffff] has been reserved
[    0.282067] system 00:00: [io  0xffff] has been reserved
[    0.282070] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.282072] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.282076] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.282078] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.282082] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.282124] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.282190] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.282193] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.282230] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.282263] pnp 00:04: Plug and Play ACPI device, IDs ETD0508 PNP0f13 (active)
[    0.282436] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.282438] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.282441] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.282443] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.282446] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.282449] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.282451] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.282454] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.282456] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.282459] system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved
[    0.282461] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.282756] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.282759] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[    0.282761] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.282804] pnp: PnP ACPI: found 7 devices
[    0.282805] ACPI: bus type PNP unregistered
[    0.289955] pci 0000:09:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.289998] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.290017] pci 0000:03:00.0: BAR 0: assigned [mem 0xc1000000-0xc1000fff]
[    0.290025] pci 0000:03:00.1: BAR 0: assigned [mem 0xc1001000-0xc10010ff]
[    0.290031] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.290036] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.290042] pci 0000:00:1c.1:   bridge window [mem 0xc1000000-0xc1ffffff]
[    0.290047] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.290055] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.290061] pci 0000:00:1c.2:   bridge window [mem 0xc2500000-0xc25fffff]
[    0.290072] pci 0000:09:00.0: BAR 6: assigned [mem 0xc2480000-0xc248ffff pref]
[    0.290074] pci 0000:00:1c.7: PCI bridge to [bus 09]
[    0.290080] pci 0000:00:1c.7:   bridge window [mem 0xc2400000-0xc24fffff]
[    0.290091] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.290093] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.290095] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.290097] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
[    0.290100] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.290102] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc1ffffff]
[    0.290104] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.290106] pci_bus 0000:04: resource 1 [mem 0xc2500000-0xc25fffff]
[    0.290109] pci_bus 0000:09: resource 1 [mem 0xc2400000-0xc24fffff]
[    0.290184] NET: Registered protocol family 2
[    0.290472] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.290574] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.290652] TCP: Hash tables configured (established 32768 bind 32768)
[    0.290671] TCP: reno registered
[    0.290678] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.290698] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.290791] NET: Registered protocol family 1
[    0.290808] pci 0000:00:02.0: Video device with shadowed ROM
[    0.323860] PCI: CLS 64 bytes, default 64
[    0.323914] Unpacking initramfs...
[    0.368127] pci 0000:03:00.0: no hotplug settings from platform
[    0.368142] pci 0000:03:00.1: no hotplug settings from platform
[    0.671034] Freeing initrd memory: 14132K (ffff880036456000 - ffff880037223000)
[    0.671049] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.671052] software IO TLB [mem 0x9b1c0000-0x9f1c0000] (64MB) mapped at [ffff88009b1c0000-ffff88009f1bffff]
[    0.671098] Simple Boot Flag at 0x44 set to 0x1
[    0.671397] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.671452] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[    0.671460] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[    0.671472] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[    0.671481] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[    0.671548] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.672008] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.672057] audit: initializing netlink subsys (disabled)
[    0.672080] audit: type=2000 audit(1425924029.656:1): initialized
[    0.672559] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.672582] zbud: loaded
[    0.672827] VFS: Disk quotas dquot_6.5.2
[    0.672848] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.672915] msgmni has been set to 7557
[    0.673313] alg: No test for stdrng (krng)
[    0.673349] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.673415] io scheduler noop registered
[    0.673420] io scheduler deadline registered
[    0.673468] io scheduler cfq registered (default)
[    0.673541] pcieport 0000:00:1c.0: device [8086:1e10] has invalid IRQ; check vendor BIOS
[    0.673733] pcieport 0000:00:1c.1: device [8086:1e12] has invalid IRQ; check vendor BIOS
[    0.673879] pcieport 0000:00:1c.2: device [8086:1e14] has invalid IRQ; check vendor BIOS
[    0.674103] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.674124] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.674199] simple-framebuffer simple-framebuffer.0: framebuffer at 0xb0000000, 0x408000 bytes, mapped to 0xffffc90010800000
[    0.674202] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1366x768x32, linelength=5504
[    0.677858] Console: switching to colour frame buffer device 170x48
[    0.681278] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.681292] intel_idle: MWAIT substates: 0x21120
[    0.681294] intel_idle: v0.4 model 0x3A
[    0.681295] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.681556] GHES: HEST is not enabled!
[    0.681658] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.682202] Linux agpgart interface v0.103
[    0.682350] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.683583] i8042: Detected active multiplexing controller, rev 1.1
[    0.684253] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.684258] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.684269] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.684271] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.684273] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.684505] mousedev: PS/2 mouse device common for all mice
[    0.684549] rtc_cmos 00:01: RTC can wake from S4
[    0.684745] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.684780] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.684798] Intel P-state driver initializing.
[    0.684811] Intel pstate controlling: cpu 0
[    0.684842] Intel pstate controlling: cpu 1
[    0.684868] Intel pstate controlling: cpu 2
[    0.684916] Intel pstate controlling: cpu 3
[    0.684996] ledtrig-cpu: registered to indicate activity on CPUs
[    0.685778] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.685781] AMD IOMMUv2 functionality not available on this system
[    0.686012] TCP: cubic registered
[    0.686160] NET: Registered protocol family 10
[    0.686677] mip6: Mobile IPv6
[    0.686686] NET: Registered protocol family 17
[    0.686700] mpls_gso: MPLS GSO support
[    0.687582] registered taskstats version 1
[    0.688620] rtc_cmos 00:01: setting system clock to 2015-03-09 18:00:29 UTC (1425924029)
[    0.688941] PM: Hibernation image not present or could not be loaded.
[    0.690873] Freeing unused kernel memory: 1200K (ffffffff818ed000 - ffffffff81a19000)
[    0.690876] Write protecting the kernel read-only data: 8192k
[    0.696061] Freeing unused kernel memory: 932K (ffff880001717000 - ffff880001800000)
[    0.697214] Freeing unused kernel memory: 220K (ffff8800019c9000 - ffff880001a00000)
[    0.700913] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.714419] systemd-udevd[70]: starting version 215
[    0.714835] random: systemd-udevd urandom read with 3 bits of entropy available
[    0.733201] thermal LNXTHERM:00: registered as thermal_zone0
[    0.733205] ACPI: Thermal Zone [THRM] (41 C)
[    0.734389] ACPI: bus type USB registered
[    0.734435] usbcore: registered new interface driver usbfs
[    0.734455] usbcore: registered new interface driver hub
[    0.734890] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
[    0.734979] pps_core: LinuxPPS API ver. 1 registered
[    0.734982] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.735029] rtsx_pci 0000:03:00.0: irq 40 for MSI/MSI-X
[    0.735050] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 40
[    0.735252] PTP clock support registered
[    0.736357] tg3.c:v3.137 (May 11, 2014)
[    0.736758] usbcore: registered new device driver usb
[    0.737376] sdhci: Secure Digital Host Controller Interface driver
[    0.737378] sdhci: Copyright(c) Pierre Ossman
[    0.737740] sdhci-pci 0000:03:00.1: SDHCI controller found [10ec:5209] (rev 1)
[    0.737741] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.737757] sdhci-pci 0000:03:00.1: enabling device (0000 -> 0002)
[    0.737832] sdhci-pci 0000:03:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    0.737840] mmc0: no vqmmc regulator found
[    0.737841] mmc0: no vmmc regulator found
[    0.737846] sdhci-pci 0000:03:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    0.738350] ehci-pci: EHCI PCI platform driver
[    0.738403] mmc0: SDHCI controller on PCI [0000:03:00.1] using DMA
[    0.738536] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.738545] SCSI subsystem initialized
[    0.738546] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.738569] ehci-pci 0000:00:1a.0: debug port 2
[    0.740413] libata version 3.00 loaded.
[    0.742469] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.742666] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc2619000
[    0.751621] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.751701] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.751705] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.751708] usb usb1: Product: EHCI Host Controller
[    0.751711] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.751714] usb usb1: SerialNumber: 0000:00:1a.0
[    0.751933] hub 1-0:1.0: USB hub found
[    0.751947] hub 1-0:1.0: 2 ports detected
[    0.752337] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.752347] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.752367] ehci-pci 0000:00:1d.0: debug port 2
[    0.756289] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.756318] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc2618000
[    0.758846] libphy: tg3 mdio bus: probed
[    0.767562] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.767674] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.767677] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.767680] usb usb2: Product: EHCI Host Controller
[    0.767681] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.767683] usb usb2: SerialNumber: 0000:00:1d.0
[    0.767850] hub 2-0:1.0: USB hub found
[    0.767865] hub 2-0:1.0: 2 ports detected
[    0.768025] ahci 0000:00:1f.2: version 3.0
[    0.768227] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    0.783647] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode
[    0.783652] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.800625] scsi0 : ahci
[    0.800899] scsi1 : ahci
[    0.801095] scsi2 : ahci
[    0.801245] scsi3 : ahci
[    0.801389] scsi4 : ahci
[    0.801535] scsi5 : ahci
[    0.801617] ata1: SATA max UDMA/133 abar m2048@0xc2617000 port 0xc2617100 irq 41
[    0.801622] ata2: SATA max UDMA/133 abar m2048@0xc2617000 port 0xc2617180 irq 41
[    0.801624] ata3: DUMMY
[    0.801626] ata4: DUMMY
[    0.801628] ata5: DUMMY
[    0.801631] ata6: SATA max UDMA/133 abar m2048@0xc2617000 port 0xc2617380 irq 41
[    0.801883] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.801897] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.802030] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.802054] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[    0.802126] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.802129] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.802131] usb usb3: Product: xHCI Host Controller
[    0.802132] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.802134] usb usb3: SerialNumber: 0000:00:14.0
[    0.802296] hub 3-0:1.0: USB hub found
[    0.802312] hub 3-0:1.0: 4 ports detected
[    0.802524] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.802528] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.802566] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.802568] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.802570] usb usb4: Product: xHCI Host Controller
[    0.802572] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.802573] usb usb4: SerialNumber: 0000:00:14.0
[    0.802715] hub 4-0:1.0: USB hub found
[    0.802730] hub 4-0:1.0: 4 ports detected
[    0.830585] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 08:9e:01:43:f2:eb
[    0.830589] tg3 0000:04:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=400:01)
[    0.830592] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    0.830594] tg3 0000:04:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.063617] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.119513] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.119545] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.119579] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.120277] ata2.00: ATA-8: SATA SSD, S5FAM018, max UDMA/100
[    1.120283] ata2.00: 39091248 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.121250] ata2.00: configured for UDMA/100
[    1.123145] ata6.00: ATAPI: HL-DT-ST DVDRAM GU61N, 2.00, max UDMA/133
[    1.123574] ata1.00: ATA-8: ST500LT012-9WS142, 0001SDM1, max UDMA/133
[    1.123581] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.129257] ata6.00: configured for UDMA/133
[    1.165450] ata1.00: configured for UDMA/133
[    1.165821] scsi 0:0:0:0: Direct-Access     ATA      ST500LT012-9WS14 SDM1 PQ: 0 ANSI: 5
[    1.166708] scsi 1:0:0:0: Direct-Access     ATA      SATA SSD         M018 PQ: 0 ANSI: 5
[    1.174872] scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GU61N     2.00 PQ: 0 ANSI: 5
[    1.194716] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.194722] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.194748] sd 1:0:0:0: [sdb] 39091248 512-byte logical blocks: (20.0 GB/18.6 GiB)
[    1.194832] sd 0:0:0:0: [sda] Write Protect is off
[    1.194837] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.194875] sd 1:0:0:0: [sdb] Write Protect is off
[    1.194880] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.194885] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.194921] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.195551] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.195615] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.195745] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    1.195826] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.195830] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.196241] hub 1-1:1.0: USB hub found
[    1.196328] hub 1-1:1.0: 6 ports detected
[    1.197140]  sdb: sdb1
[    1.197855] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.209090] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.209095] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.209359] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.234874]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    1.236110] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.307471] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.439940] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.439947] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.440400] hub 2-1:1.0: USB hub found
[    1.440531] hub 2-1:1.0: 8 ports detected
[    1.607382] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[    1.667269] tsc: Refined TSC clocksource calibration: 1795.920 MHz
[    1.739146] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b
[    1.739156] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.739161] usb 3-2: Product: USB Receiver
[    1.739165] usb 3-2: Manufacturer: Logitech
[    1.743287] hidraw: raw HID events driver (C) Jiri Kosina
[    1.751011] PM: Starting manual resume from disk
[    1.751020] PM: Hibernation image partition 8:5 present
[    1.751024] PM: Looking for hibernation image.
[    1.751047] usbcore: registered new interface driver usbhid
[    1.751051] usbhid: USB HID core driver
[    1.754291] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
[    1.763145] PM: Image not found (code -22)
[    1.763151] PM: Hibernation image not present or could not be loaded.
[    1.776111] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    1.808662] input: Logitech Unifying Device. Wireless PID:401b as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input5
[    1.808845] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:401b] on usb-0000:00:14.0-2:1
[    1.810757] input: Logitech Unifying Device. Wireless PID:4016 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input6
[    1.810901] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4016] on usb-0000:00:14.0-2:2
[    1.811380] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    1.902115] systemd[1]: RTC configured in localtime, applying delta of -180 minutes to system time.
[    1.962599] usb 1-1.1: New USB device found, idVendor=1bcf, idProduct=2c32
[    1.962617] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.962620] usb 1-1.1: Product: HD WebCam
[    1.962621] usb 1-1.1: Manufacturer: NC.21411.01123505CACLM0629
[    2.107284] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[    2.119337] lp: driver loaded but no devices found
[    2.121201] ppdev: user-space parallel port driver
[    2.130808] fuse init (API version 7.23)
[    2.141312] systemd-udevd[193]: starting version 215
[    2.200992] usb 1-1.3: string descriptor 0 read error: -22
[    2.201050] usb 1-1.3: New USB device found, idVendor=0489, idProduct=e04e
[    2.201055] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.275255] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[    2.280781] random: nonblocking pool is initialized
[    2.282550] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[    2.282558] ACPI: Power Button [PWRB]
[    2.282638] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8
[    2.282643] ACPI: Sleep Button [SLPB]
[    2.282723] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
[    2.282769] ACPI: Lid Switch [LID]
[    2.282855] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input10
[    2.282859] ACPI: Power Button [PWRF]
[    2.283461] ACPI: AC Adapter [ACAD] (on-line)
[    2.285646] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[    2.287446] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.290386] wmi: Mapper loaded
[    2.301141] ACPI: Battery Slot [BAT1] (battery present)
[    2.305359] [drm] Initialized drm 1.1.0 20060810
[    2.318429] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[    2.318439] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.318445] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[    2.318451] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.318453] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[    2.318458] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.318460] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[    2.318465] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.318467] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.471093] ata2: failed to read log page 10h (errno=-5)
[    2.471175] ata2.00: exception Emask 0x1 SAct 0x3ff8 SErr 0x0 action 0x0
[    2.471253] ata2.00: irq_stat 0x40000001
[    2.471305] ata2.00: failed command: READ FPDMA QUEUED
[    2.471373] ata2.00: cmd 60/38:18:f0:9d:09/00:00:01:00:00/40 tag 3 ncq 28672 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.471534] ata2.00: status: { DRDY ERR }
[    2.471582] ata2.00: error: { ABRT }
[    2.471629] ata2.00: failed command: READ FPDMA QUEUED
[    2.471696] ata2.00: cmd 60/08:20:78:3e:81/00:00:00:00:00/40 tag 4 ncq 4096 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.471856] ata2.00: status: { DRDY ERR }
[    2.471904] ata2.00: error: { ABRT }
[    2.471949] ata2.00: failed command: READ FPDMA QUEUED
[    2.472016] ata2.00: cmd 60/00:28:a8:c2:f2/02:00:00:00:00/40 tag 5 ncq 262144 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.472177] ata2.00: status: { DRDY ERR }
[    2.472224] ata2.00: error: { ABRT }
[    2.472270] ata2.00: failed command: READ FPDMA QUEUED
[    2.472336] ata2.00: cmd 60/68:30:80:c5:09/00:00:01:00:00/40 tag 6 ncq 53248 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.472496] ata2.00: status: { DRDY ERR }
[    2.472544] ata2.00: error: { ABRT }
[    2.472590] ata2.00: failed command: READ FPDMA QUEUED
[    2.472656] ata2.00: cmd 60/08:38:60:43:81/00:00:00:00:00/40 tag 7 ncq 4096 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.472815] ata2.00: status: { DRDY ERR }
[    2.472863] ata2.00: error: { ABRT }
[    2.472908] ata2.00: failed command: READ FPDMA QUEUED
[    2.472974] ata2.00: cmd 60/00:40:e8:f5:48/01:00:00:00:00/40 tag 8 ncq 131072 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.473135] ata2.00: status: { DRDY ERR }
[    2.473182] ata2.00: error: { ABRT }
[    2.473228] ata2.00: failed command: READ FPDMA QUEUED
[    2.473293] ata2.00: cmd 60/18:48:48:f9:52/00:00:01:00:00/40 tag 9 ncq 12288 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.473453] ata2.00: status: { DRDY ERR }
[    2.473500] ata2.00: error: { ABRT }
[    2.473545] ata2.00: failed command: READ FPDMA QUEUED
[    2.473612] ata2.00: cmd 60/20:50:38:84:47/00:00:01:00:00/40 tag 10 ncq 16384 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.473772] ata2.00: status: { DRDY ERR }
[    2.473820] ata2.00: error: { ABRT }
[    2.473865] ata2.00: failed command: READ FPDMA QUEUED
[    2.473931] ata2.00: cmd 60/08:58:d8:39:81/00:00:00:00:00/40 tag 11 ncq 4096 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.479026] ata2.00: status: { DRDY ERR }
[    2.480199] ata2.00: error: { ABRT }
[    2.482565] ata2.00: failed command: READ FPDMA QUEUED
[    2.485029] ata2.00: cmd 60/08:60:00:19:01/00:00:01:00:00/40 tag 12 ncq 4096 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.489887] ata2.00: status: { DRDY ERR }
[    2.492307] ata2.00: error: { ABRT }
[    2.494086] ata2.00: failed command: READ FPDMA QUEUED
[    2.495875] ata2.00: cmd 60/20:68:68:84:47/00:00:01:00:00/40 tag 13 ncq 16384 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.499487] ata2.00: status: { DRDY ERR }
[    2.501281] ata2.00: error: { ABRT }
[    2.667185] Switched to clocksource tsc
[    7.501446] ata2.00: qc timeout (cmd 0xec)
[    7.501462] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[    7.501466] ata2.00: revalidation failed (errno=-5)
[    7.503911] ata2: hard resetting link
[    7.821367] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.822705] ata2.00: configured for UDMA/100
[    7.822738] ata2: EH complete
[    7.981669] ata2.00: exception Emask 0x0 SAct 0x7f00000f SErr 0x0 action 0x0
[    7.986892] ata2.00: irq_stat 0x40000008
[    7.989535] ata2.00: failed command: READ FPDMA QUEUED
[    7.992165] ata2.00: cmd 60/38:c0:f0:9d:09/00:00:01:00:00/40 tag 24 ncq 28672 in
         res 41/40:38:f0:9d:09/00:00:01:00:00/00 Emask 0x409 (media error) <F>
[    7.997476] ata2.00: status: { DRDY ERR }
[    7.999868] ata2.00: error: { UNC }
[    8.003935] ata2.00: configured for UDMA/100
[    8.003974] sd 1:0:0:0: [sdb] Unhandled sense code
[    8.003979] sd 1:0:0:0: [sdb]  
[    8.003983] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    8.003986] sd 1:0:0:0: [sdb]  
[    8.003988] Sense Key : Medium Error [current] [descriptor]
[    8.003994] Descriptor sense data with sense descriptors (in hex):
[    8.003996]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[    8.004010]         01 09 9d f0 
[    8.004017] sd 1:0:0:0: [sdb]  
[    8.004021] Add. Sense: Unrecovered read error - auto reallocate failed
[    8.004024] sd 1:0:0:0: [sdb] CDB: 
[    8.004027] Read(10): 28 00 01 09 9d f0 00 00 38 00
[    8.004039] end_request: I/O error, dev sdb, sector 17407472
[    8.006477] ata2: EH complete
[    8.009576] ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305f conflicts with OpRegion 0x0000000000003040-0x000000000000304f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[    8.009592] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.010942] EFI Variables Facility v0.08 2004-May-17
[    8.011277] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    8.015567] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    8.022717] ata2.00: exception Emask 0x0 SAct 0xe000000 SErr 0x0 action 0x0
[    8.027595] ata2.00: irq_stat 0x40000008
[    8.030090] ata2.00: failed command: READ FPDMA QUEUED
[    8.032535] ata2.00: cmd 60/08:c8:f0:9d:09/00:00:01:00:00/40 tag 25 ncq 4096 in
         res 41/40:08:f0:9d:09/00:00:01:00:00/00 Emask 0x409 (media error) <F>
[    8.037114] ata2.00: status: { DRDY ERR }
[    8.039007] ata2.00: error: { UNC }
[    8.042243] ata2.00: configured for UDMA/100
[    8.042259] sd 1:0:0:0: [sdb] Unhandled sense code
[    8.042262] sd 1:0:0:0: [sdb]  
[    8.042264] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    8.042267] sd 1:0:0:0: [sdb]  
[    8.042269] Sense Key : Medium Error [current] [descriptor]
[    8.042273] Descriptor sense data with sense descriptors (in hex):
[    8.042275]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[    8.042287]         01 09 9d f0 
[    8.042291] sd 1:0:0:0: [sdb]  
[    8.042294] Add. Sense: Unrecovered read error - auto reallocate failed
[    8.042297] sd 1:0:0:0: [sdb] CDB: 
[    8.042299] Read(10): 28 00 01 09 9d f0 00 00 08 00
[    8.042309] end_request: I/O error, dev sdb, sector 17407472
[    8.044264] ata2: EH complete
[    8.060243] pstore: Registered efi as persistent store backend
[    8.062426] [drm] Memory usable by graphics device = 2048M
[    8.062431] checking generic (b0000000 408000) vs hw (b0000000 10000000)
[    8.062434] fb: switching to inteldrmfb from simple
[    8.062480] Console: switching to colour dummy device 80x25
[    8.062568] [drm] Replacing VGA console driver
[    8.067048] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    8.067055] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.067059] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    8.067062] sound hdaudioC0D0:    mono: mono_out=0x0
[    8.067064] sound hdaudioC0D0:    inputs:
[    8.067067] sound hdaudioC0D0:      Mic=0x12
[    8.072164] alg: No test for crc32 (crc32-pclmul)
[    8.078719] cfg80211: Calling CRDA to update world regulatory domain
[    8.085434] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[    8.085448] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.085450] [drm] Driver supports precise vblank timestamp query.
[    8.085565] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.090265] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    8.090380] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    8.105592] media: Linux media interface: v0.10
[    8.111483] Linux video capture interface: v2.00
[    8.128564] ath: phy0: ASPM enabled: 0x42
[    8.128570] ath: EEPROM regdomain: 0x6c
[    8.128572] ath: EEPROM indicates we should expect a direct regpair map
[    8.128575] ath: Country alpha2 being used: 00
[    8.128577] ath: Regpair used: 0x6c
[    8.129799] intel_rapl: RAPL domain dram detection failed
[    8.130499] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c32)
[    8.133006] [drm] VBT doesn't support DRRS
[    8.136513] Bluetooth: Core ver 2.19
[    8.136531] NET: Registered protocol family 31
[    8.136534] Bluetooth: HCI device and connection manager initialized
[    8.136545] Bluetooth: HCI socket layer initialized
[    8.136551] Bluetooth: L2CAP socket layer initialized
[    8.136569] Bluetooth: SCO socket layer initialized
[    8.139243] usbcore: registered new interface driver btusb
[    8.139530] acer_wmi: Acer Laptop ACPI-WMI Extras
[    8.139657] acer_wmi: Function bitmap for Communication Button: 0x801
[    8.139803] acer_wmi: Brightness must be controlled by acpi video driver
[    8.142947] usb 1-1.3: firmware: failed to load ar3k/AthrBT_0x11020000.dfu (-2)
[    8.142959] usb 1-1.3: Direct firmware load failed with error -2
[    8.142962] usb 1-1.3: Falling back to user helper
[    8.143412] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input16
[    8.143660] usbcore: registered new interface driver uvcvideo
[    8.143663] USB Video Class driver (1.1.1)
[    8.146813] iTCO_vendor_support: vendor-support=0
[    8.148912] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    8.149294] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90010a80000, irq=19
[    8.149717] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.149769] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    8.150642] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.154431] input: Acer WMI hotkeys as /devices/virtual/input/input17
[    8.154984] input: Acer BMA150 accelerometer as /devices/virtual/input/input18
[    8.155254] Bluetooth: Loading patch file failed
[    8.155268] ath3k: probe of 1-1.3:1.0 failed with error -12
[    8.155314] usbcore: registered new interface driver ath3k
[    8.198306] cfg80211: World regulatory domain updated:
[    8.198310] cfg80211:  DFS Master region: unset
[    8.198312] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    8.198315] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    8.198317] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    8.198318] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    8.198321] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    8.198323] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    8.198325] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    8.198326] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    8.198328] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    8.217184] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    8.234375] fbcon: inteldrmfb (fb0) is primary device
[    8.453295] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    8.641440] psmouse serio2: elantech: assuming hardware version 4 (with firmware version 0x461f08)
[    8.654440] psmouse serio2: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0e.
[    8.716324] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input13
[    8.897677] [drm:intel_dp_start_link_train] *ERROR* too many voltage retries, give up
[    9.205482] Console: switching to colour frame buffer device 170x48
[    9.210830] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    9.210834] i915 0000:00:02.0: registered panic notifier
[    9.241899] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    9.242106] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21
[    9.242208] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.359376] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    9.375628] Adding 3999740k swap on /dev/sda5.  Priority:-1 extents:1 across:3999740k FS
[    9.616675] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    9.671757] systemd-journald[171]: Received request to flush runtime journal from PID 1
[    9.829063] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    9.836412] RPC: Registered named UNIX socket transport module.
[    9.836416] RPC: Registered udp transport module.
[    9.836418] RPC: Registered tcp transport module.
[    9.836419] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    9.841943] FS-Cache: Loaded
[    9.850522] FS-Cache: Netfs 'nfs' registered for caching
[    9.859827] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   10.320734] tg3 0000:04:00.0: irq 46 for MSI/MSI-X
[   10.331709] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.345160] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   10.825454] tg3 0000:04:00.0 eth0: Link is down
[   11.145143] [drm:intel_dp_start_link_train] *ERROR* too many voltage retries, give up
[   13.922245] wlan0: authenticate with 1c:af:f7:d1:68:5b
[   13.928380] wlan0: send auth to 1c:af:f7:d1:68:5b (try 1/3)
[   13.930361] wlan0: authenticated
[   13.930769] ath9k 0000:09:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   13.931430] wlan0: associate with 1c:af:f7:d1:68:5b (try 1/3)
[   13.935609] wlan0: RX AssocResp from 1c:af:f7:d1:68:5b (capab=0x431 status=0 aid=2)
[   13.935689] wlan0: associated
[   13.935706] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  524.560894] acer_wmi: Unknown function number - 4 - 0
[  524.783900] acer_wmi: Unknown function number - 4 - 0
[  524.808438] acer_wmi: Unknown function number - 4 - 0
[  524.836523] acer_wmi: Unknown function number - 4 - 0
[  524.861285] acer_wmi: Unknown function number - 4 - 0
[  524.886115] acer_wmi: Unknown function number - 4 - 0
[  524.910970] acer_wmi: Unknown function number - 4 - 0
[  524.935646] acer_wmi: Unknown function number - 4 - 0
[  524.960433] acer_wmi: Unknown function number - 4 - 0
[  524.985686] acer_wmi: Unknown function number - 4 - 0
[  525.010149] acer_wmi: Unknown function number - 4 - 0
[  525.034805] acer_wmi: Unknown function number - 4 - 0
[  525.059699] acer_wmi: Unknown function number - 4 - 0
[  525.084500] acer_wmi: Unknown function number - 4 - 0
[  525.109581] acer_wmi: Unknown function number - 4 - 0
[  525.134206] acer_wmi: Unknown function number - 4 - 0
[  525.158962] acer_wmi: Unknown function number - 4 - 0
[  525.183745] acer_wmi: Unknown function number - 4 - 0
[  525.208564] acer_wmi: Unknown function number - 4 - 0
[  525.233528] acer_wmi: Unknown function number - 4 - 0
[  525.258229] acer_wmi: Unknown function number - 4 - 0
[  525.283029] acer_wmi: Unknown function number - 4 - 0
[  525.307828] acer_wmi: Unknown function number - 4 - 0
[  525.332637] acer_wmi: Unknown function number - 4 - 0
[  525.364872] acer_wmi: Unknown function number - 4 - 0
[  525.389607] acer_wmi: Unknown function number - 4 - 0
[  525.414343] acer_wmi: Unknown function number - 4 - 0
[  525.439170] acer_wmi: Unknown function number - 4 - 0
[  525.463966] acer_wmi: Unknown function number - 4 - 0
[  525.488966] acer_wmi: Unknown function number - 4 - 0
[  525.513554] acer_wmi: Unknown function number - 4 - 0

 

 

La parte que me preocupa es esta:

 

 

[    2.471093] ata2: failed to read log page 10h (errno=-5)
[    2.471175] ata2.00: exception Emask 0x1 SAct 0x3ff8 SErr 0x0 action 0x0
[    2.471253] ata2.00: irq_stat 0x40000001
[    2.471305] ata2.00: failed command: READ FPDMA QUEUED
[    2.471373] ata2.00: cmd 60/38:18:f0:9d:09/00:00:01:00:00/40 tag 3 ncq 28672 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.471534] ata2.00: status: { DRDY ERR }
[    2.471582] ata2.00: error: { ABRT }
[    2.471629] ata2.00: failed command: READ FPDMA QUEUED
[    2.471696] ata2.00: cmd 60/08:20:78:3e:81/00:00:00:00:00/40 tag 4 ncq 4096 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.471856] ata2.00: status: { DRDY ERR }
[    2.471904] ata2.00: error: { ABRT }
[    2.471949] ata2.00: failed command: READ FPDMA QUEUED
[    2.472016] ata2.00: cmd 60/00:28:a8:c2:f2/02:00:00:00:00/40 tag 5 ncq 262144 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.472177] ata2.00: status: { DRDY ERR }
[    2.472224] ata2.00: error: { ABRT }
[    2.472270] ata2.00: failed command: READ FPDMA QUEUED
[    2.472336] ata2.00: cmd 60/68:30:80:c5:09/00:00:01:00:00/40 tag 6 ncq 53248 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.472496] ata2.00: status: { DRDY ERR }
[    2.472544] ata2.00: error: { ABRT }
[    2.472590] ata2.00: failed command: READ FPDMA QUEUED
[    2.472656] ata2.00: cmd 60/08:38:60:43:81/00:00:00:00:00/40 tag 7 ncq 4096 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.472815] ata2.00: status: { DRDY ERR }
[    2.472863] ata2.00: error: { ABRT }
[    2.472908] ata2.00: failed command: READ FPDMA QUEUED
[    2.472974] ata2.00: cmd 60/00:40:e8:f5:48/01:00:00:00:00/40 tag 8 ncq 131072 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.473135] ata2.00: status: { DRDY ERR }
[    2.473182] ata2.00: error: { ABRT }
[    2.473228] ata2.00: failed command: READ FPDMA QUEUED
[    2.473293] ata2.00: cmd 60/18:48:48:f9:52/00:00:01:00:00/40 tag 9 ncq 12288 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.473453] ata2.00: status: { DRDY ERR }
[    2.473500] ata2.00: error: { ABRT }
[    2.473545] ata2.00: failed command: READ FPDMA QUEUED
[    2.473612] ata2.00: cmd 60/20:50:38:84:47/00:00:01:00:00/40 tag 10 ncq 16384 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.473772] ata2.00: status: { DRDY ERR }
[    2.473820] ata2.00: error: { ABRT }
[    2.473865] ata2.00: failed command: READ FPDMA QUEUED
[    2.473931] ata2.00: cmd 60/08:58:d8:39:81/00:00:00:00:00/40 tag 11 ncq 4096 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.479026] ata2.00: status: { DRDY ERR }
[    2.480199] ata2.00: error: { ABRT }
[    2.482565] ata2.00: failed command: READ FPDMA QUEUED
[    2.485029] ata2.00: cmd 60/08:60:00:19:01/00:00:01:00:00/40 tag 12 ncq 4096 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.489887] ata2.00: status: { DRDY ERR }
[    2.492307] ata2.00: error: { ABRT }
[    2.494086] ata2.00: failed command: READ FPDMA QUEUED
[    2.495875] ata2.00: cmd 60/20:68:68:84:47/00:00:01:00:00/40 tag 13 ncq 16384 in
         res 51/04:48:48:f9:52/00:00:01:00:00/40 Emask 0x1 (device error)
[    2.499487] ata2.00: status: { DRDY ERR }
[    2.501281] ata2.00: error: { ABRT }
[    2.667185] Switched to clocksource tsc
[    7.501446] ata2.00: qc timeout (cmd 0xec)
[    7.501462] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[    7.501466] ata2.00: revalidation failed (errno=-5)
[    7.503911] ata2: hard resetting link
[    7.821367] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.822705] ata2.00: configured for UDMA/100
[    7.822738] ata2: EH complete
[    7.981669] ata2.00: exception Emask 0x0 SAct 0x7f00000f SErr 0x0 action 0x0
[    7.986892] ata2.00: irq_stat 0x40000008
[    7.989535] ata2.00: failed command: READ FPDMA QUEUED
[    7.992165] ata2.00: cmd 60/38:c0:f0:9d:09/00:00:01:00:00/40 tag 24 ncq 28672 in
         res 41/40:38:f0:9d:09/00:00:01:00:00/00 Emask 0x409 (media error) <F>
[    7.997476] ata2.00: status: { DRDY ERR }
[    7.999868] ata2.00: error: { UNC }

 

 

 

Por lo que busnqué está relacionado con problemas con el disco, no tengo problemas, solamente me preocupan los errores y lo que dicen sobre los errores en otras paginas:

 

En StackOwerflow uno pregunta si los errores son porque está por morir el disco duro o es otra cosa. La respuesta dice que no está por morir, el disco duro ya está muerto :o

 

Acá dice que podrían ser unos cables mal conectados https://bugs.archlinux.org/task/34014

 

Acá dice que desactive NCQ (Native Command Queuing)

 

Este cambió la notebook :o :o

 

Que hago? Por ahora no toqué nada

 

Ahora que pienso tengo que ver que me dice el dmesg de Linux Mint, me fijo y edito el mensaje

 

EDIT:

Acá está el dmesg de Mint, no tira errores:

 

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-37-generic (buildd@kapok) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 (Ubuntu 3.13.0-37.64-generic 3.13.11.7)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=66ba25a8-cced-4db1-b4a0-d23c757c66d6 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a0daffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a0db0000-0x00000000a21affff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a21b0000-0x00000000a67befff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a67bf000-0x00000000a68e7fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a68e8000-0x00000000a68e8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a68e9000-0x00000000a68f2fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a68f3000-0x00000000a68f3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a68f4000-0x00000000a68fafff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a68fb000-0x00000000a68fbfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a68fc000-0x00000000a6911fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a6912000-0x00000000a6912fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6913000-0x00000000a6917fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a6918000-0x00000000a6918fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6919000-0x00000000a6926fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a6927000-0x00000000a6927fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6928000-0x00000000a692cfff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a692d000-0x00000000a692dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a692e000-0x00000000a69befff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a69bf000-0x00000000a6ebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by INSYDE Corp.
[    0.000000] efi:  ACPI=0xa6ffe000  ACPI 2.0=0xa6ffe014  SMBIOS=0xa6ebef98 
[    0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[    0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB)
[    0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[    0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[    0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001503000) (20MB)
[    0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000001503000-0x0000000002000000) (10MB)
[    0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003403000) (20MB)
[    0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000003403000-0x0000000020000000) (459MB)
[    0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[    0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x00000000348aa000) (326MB)
[    0.000000] efi: mem11: type=2, attr=0xf, range=[0x00000000348aa000-0x000000003644d000) (27MB)
[    0.000000] efi: mem12: type=7, attr=0xf, range=[0x000000003644d000-0x0000000040004000) (155MB)
[    0.000000] efi: mem13: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[    0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000040005000-0x0000000076cb0000) (876MB)
[    0.000000] efi: mem15: type=2, attr=0xf, range=[0x0000000076cb0000-0x000000009f1c0000) (645MB)
[    0.000000] efi: mem16: type=4, attr=0xf, range=[0x000000009f1c0000-0x000000009f1e0000) (0MB)
[    0.000000] efi: mem17: type=7, attr=0xf, range=[0x000000009f1e0000-0x000000009fd78000) (11MB)
[    0.000000] efi: mem18: type=2, attr=0xf, range=[0x000000009fd78000-0x000000009ff4c000) (1MB)
[    0.000000] efi: mem19: type=4, attr=0xf, range=[0x000000009ff4c000-0x00000000a0db0000) (14MB)
[    0.000000] efi: mem20: type=0, attr=0xf, range=[0x00000000a0db0000-0x00000000a21b0000) (20MB)
[    0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000a21b0000-0x00000000a21bd000) (0MB)
[    0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000a21bd000-0x00000000a21bf000) (0MB)
[    0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000a21bf000-0x00000000a228b000) (0MB)
[    0.000000] efi: mem24: type=1, attr=0xf, range=[0x00000000a228b000-0x00000000a23bf000) (1MB)
[    0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000a23bf000-0x00000000a3a8d000) (22MB)
[    0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000a3a8d000-0x00000000a3f0e000) (4MB)
[    0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000a3f0e000-0x00000000a3fb2000) (0MB)
[    0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000a3fb2000-0x00000000a4408000) (4MB)
[    0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000a4408000-0x00000000a440d000) (0MB)
[    0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000a440d000-0x00000000a440f000) (0MB)
[    0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000a440f000-0x00000000a4411000) (0MB)
[    0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000a4411000-0x00000000a4446000) (0MB)
[    0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000a4446000-0x00000000a444b000) (0MB)
[    0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000a444b000-0x00000000a4455000) (0MB)
[    0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000a4455000-0x00000000a4456000) (0MB)
[    0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000a4456000-0x00000000a447c000) (0MB)
[    0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000a447c000-0x00000000a447e000) (0MB)
[    0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000a447e000-0x00000000a45a8000) (1MB)
[    0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000a45a8000-0x00000000a45ad000) (0MB)
[    0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000a45ad000-0x00000000a45b0000) (0MB)
[    0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000a45b0000-0x00000000a45b1000) (0MB)
[    0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000a45b1000-0x00000000a45f5000) (0MB)
[    0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000a45f5000-0x00000000a4659000) (0MB)
[    0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000a4659000-0x00000000a465b000) (0MB)
[    0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000a465b000-0x00000000a465c000) (0MB)
[    0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000a465c000-0x00000000a46e2000) (0MB)
[    0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000a46e2000-0x00000000a46e3000) (0MB)
[    0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000a46e3000-0x00000000a49e2000) (2MB)
[    0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000a49e2000-0x00000000a49ec000) (0MB)
[    0.000000] efi: mem50: type=4, attr=0xf, range=[0x00000000a49ec000-0x00000000a63bf000) (25MB)
[    0.000000] efi: mem51: type=7, attr=0xf, range=[0x00000000a63bf000-0x00000000a64d3000) (1MB)
[    0.000000] efi: mem52: type=2, attr=0xf, range=[0x00000000a64d3000-0x00000000a64df000) (0MB)
[    0.000000] efi: mem53: type=3, attr=0xf, range=[0x00000000a64df000-0x00000000a67bf000) (2MB)
[    0.000000] efi: mem54: type=5, attr=0x800000000000000f, range=[0x00000000a67bf000-0x00000000a68da000) (1MB)
[    0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000a68da000-0x00000000a68e8000) (0MB)
[    0.000000] efi: mem56: type=6, attr=0x800000000000000f, range=[0x00000000a68e8000-0x00000000a68e9000) (0MB)
[    0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000a68e9000-0x00000000a68f3000) (0MB)
[    0.000000] efi: mem58: type=6, attr=0x800000000000000f, range=[0x00000000a68f3000-0x00000000a68f4000) (0MB)
[    0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000a68f4000-0x00000000a68fb000) (0MB)
[    0.000000] efi: mem60: type=6, attr=0x800000000000000f, range=[0x00000000a68fb000-0x00000000a68fc000) (0MB)
[    0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000a68fc000-0x00000000a6912000) (0MB)
[    0.000000] efi: mem62: type=6, attr=0x800000000000000f, range=[0x00000000a6912000-0x00000000a6913000) (0MB)
[    0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000a6913000-0x00000000a6918000) (0MB)
[    0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x00000000a6918000-0x00000000a6919000) (0MB)
[    0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000a6919000-0x00000000a6927000) (0MB)
[    0.000000] efi: mem66: type=6, attr=0x800000000000000f, range=[0x00000000a6927000-0x00000000a6928000) (0MB)
[    0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000a6928000-0x00000000a692d000) (0MB)
[    0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x00000000a692d000-0x00000000a692e000) (0MB)
[    0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000a692e000-0x00000000a69bf000) (0MB)
[    0.000000] efi: mem70: type=6, attr=0x800000000000000f, range=[0x00000000a69bf000-0x00000000a6abf000) (1MB)
[    0.000000] efi: mem71: type=0, attr=0xf, range=[0x00000000a6abf000-0x00000000a6bc8000) (1MB)
[    0.000000] efi: mem72: type=0, attr=0xf, range=[0x00000000a6bc8000-0x00000000a6ebf000) (2MB)
[    0.000000] efi: mem73: type=10, attr=0xf, range=[0x00000000a6ebf000-0x00000000a6fa2000) (0MB)
[    0.000000] efi: mem74: type=10, attr=0xf, range=[0x00000000a6fa2000-0x00000000a6fbf000) (0MB)
[    0.000000] efi: mem75: type=9, attr=0xf, range=[0x00000000a6fbf000-0x00000000a6fdb000) (0MB)
[    0.000000] efi: mem76: type=9, attr=0xf, range=[0x00000000a6fdb000-0x00000000a6fff000) (0MB)
[    0.000000] efi: mem77: type=4, attr=0xf, range=[0x00000000a6fff000-0x00000000a7000000) (0MB)
[    0.000000] efi: mem78: type=7, attr=0xf, range=[0x0000000100000000-0x000000014f600000) (1270MB)
[    0.000000] efi: mem79: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[    0.000000] efi: mem80: type=0, attr=0x0, range=[0x00000000a7000000-0x00000000afa00000) (138MB)
[    0.000000] efi: mem81: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[    0.000000] efi: mem82: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[    0.000000] efi: mem83: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[    0.000000] efi: mem84: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[    0.000000] efi: mem85: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[    0.000000] efi: mem86: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[    0.000000] efi: mem87: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000fff12000) (3MB)
[    0.000000] efi: mem88: type=11, attr=0x8000000000000000, range=[0x00000000fff12000-0x00000000fff40000) (0MB)
[    0.000000] efi: mem89: type=11, attr=0x8000000000000000, range=[0x00000000fff40000-0x0000000100000000) (0MB)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Acer Aspire M5-481T/MA40_HX, BIOS V2.11 11/02/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 0A0000000 mask FFC000000 write-back
[    0.000000]   3 base 0A4000000 mask FFE000000 write-back
[    0.000000]   4 base 0A6000000 mask FFF000000 write-back
[    0.000000]   5 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   6 base 100000000 mask F80000000 write-back
[    0.000000]   7 base 14F600000 mask FFFE00000 uncachable
[    0.000000]   8 base 14F800000 mask FFF800000 uncachable
[    0.000000]   9 base 150000000 mask FF0000000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff88000007c000] 7c000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x02fe1000, 0x02fe1fff] PGTABLE
[    0.000000] BRK [0x02fe2000, 0x02fe2fff] PGTABLE
[    0.000000] BRK [0x02fe3000, 0x02fe3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x14f400000-0x14f5fffff]
[    0.000000]  [mem 0x14f400000-0x14f5fffff] page 2M
[    0.000000] BRK [0x02fe4000, 0x02fe4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14f3fffff]
[    0.000000]  [mem 0x14c000000-0x14f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
[    0.000000]  [mem 0x100000000-0x14bffffff] page 2M
[    0.000000] BRK [0x02fe5000, 0x02fe5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x02fe6000, 0x02fe6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0xa0daffff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0xa0bfffff] page 2M
[    0.000000]  [mem 0xa0c00000-0xa0daffff] page 4k
[    0.000000] init_memory_mapping: [mem 0xa21b0000-0xa67befff]
[    0.000000]  [mem 0xa21b0000-0xa21fffff] page 4k
[    0.000000]  [mem 0xa2200000-0xa65fffff] page 2M
[    0.000000]  [mem 0xa6600000-0xa67befff] page 4k
[    0.000000] init_memory_mapping: [mem 0xa6fff000-0xa6ffffff]
[    0.000000]  [mem 0xa6fff000-0xa6ffffff] page 4k
[    0.000000] RAMDISK: [mem 0x348aa000-0x3644cfff]
[    0.000000] ACPI: RSDP 00000000a6ffe014 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 00000000a6ffe210 0000A4 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 00000000a6ffb000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DSDT 00000000a6fec000 00B22C (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: FACS 00000000a6fba000 000040
[    0.000000] ACPI: UEFI 00000000a6ffd000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASF! 00000000a6ffc000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: HPET 00000000a6ffa000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: APIC 00000000a6ff9000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MCFG 00000000a6ff8000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SLIC 00000000a6feb000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: WDAT 00000000a6fea000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 00000000a6fe8000 001068 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: BOOT 00000000a6fe6000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASPT 00000000a6fe1000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: FPDT 00000000a6fdf000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MSDM 00000000a6fde000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 00000000a6fdd000 0008E4 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 00000000a6fdc000 000A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: BGRT 00000000a6fdb000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x14f5fffff]
[    0.000000]   NODE_DATA [mem 0x14f5f5000-0x14f5f9fff]
[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014ebfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x14f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00087fff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0xa0daffff]
[    0.000000]   node   0: [mem 0xa21b0000-0xa67befff]
[    0.000000]   node   0: [mem 0xa6fff000-0xa6ffffff]
[    0.000000]   node   0: [mem 0x100000000-0x14f5fffff]
[    0.000000] On node 0 totalpages: 1001286
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 24 pages reserved
[    0.000000]   DMA zone: 3975 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10503 pages used for memmap
[    0.000000]   DMA32 zone: 672191 pages, LIFO batch:31
[    0.000000]   Normal zone: 5080 pages used for memmap
[    0.000000]   Normal zone: 325120 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0db0000-0xa21affff]
[    0.000000] PM: Registered nosave memory: [mem 0xa67bf000-0xa68e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68e8000-0xa68e8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68e9000-0xa68f2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68f3000-0xa68f3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68f4000-0xa68fafff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68fb000-0xa68fbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68fc000-0xa6911fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6912000-0xa6912fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6913000-0xa6917fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6918000-0xa6918fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6919000-0xa6926fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6927000-0xa6927fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6928000-0xa692cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xa692d000-0xa692dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xa692e000-0xa69befff]
[    0.000000] PM: Registered nosave memory: [mem 0xa69bf000-0xa6ebefff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6ebf000-0xa6fbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6fbf000-0xa6ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xa7000000-0xaf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88014f200000 s86400 r8192 d24192 u262144
[    0.000000] pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 985615
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=66ba25a8-cced-4db1-b4a0-d23c757c66d6 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3770884K/4005144K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 234260K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-7.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16252928 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1795.974 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.94 BogoMIPS (lpj=7183896)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.013059] Security Framework initialized
[    0.013083] AppArmor: AppArmor initialized
[    0.013085] Yama: becoming mindful.
[    0.013476] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.014917] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.015582] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.015589] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.015825] Initializing cgroup subsys memory
[    0.015832] Initializing cgroup subsys devices
[    0.015834] Initializing cgroup subsys freezer
[    0.015836] Initializing cgroup subsys blkio
[    0.015838] Initializing cgroup subsys perf_event
[    0.015841] Initializing cgroup subsys hugetlb
[    0.015870] CPU: Physical Processor ID: 0
[    0.015871] CPU: Processor Core ID: 0
[    0.015877] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.015877] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.015882] mce: CPU supports 7 MCE banks
[    0.015896] CPU0: Thermal monitoring enabled (TM1)
[    0.015907] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.015907] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.015907] tlb_flushall_shift: 2
[    0.016069] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[    0.017663] ACPI: Core revision 20131115
[    0.024255] ACPI: All ACPI Tables successfully acquired
[    0.038013] ftrace: allocating 28541 entries in 112 pages
[    0.057039] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.096714] smpboot: CPU0: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (fam: 06, model: 3a, stepping: 09)
[    0.096723] TSC deadline timer enabled
[    0.096736] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.096744] ... version:                3
[    0.096746] ... bit width:              48
[    0.096747] ... generic registers:      4
[    0.096748] ... value mask:             0000ffffffffffff
[    0.096749] ... max period:             0000ffffffffffff
[    0.096751] ... fixed-purpose events:   3
[    0.096752] ... event mask:             000000070000000f
[    0.098897] x86: Booting SMP configuration:
[    0.112192] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.098900] .... node  #0, CPUs:      #1 #2 #3
[    0.138605] x86: Booted up 1 node, 4 CPUs
[    0.138609] smpboot: Total of 4 processors activated (14367.79 BogoMIPS)
[    0.142946] devtmpfs: initialized
[    0.146162] EVM: security.selinux
[    0.146164] EVM: security.SMACK64
[    0.146165] EVM: security.ima
[    0.146166] EVM: security.capability
[    0.146226] PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes)
[    0.147247] pinctrl core: initialized pinctrl subsystem
[    0.147317] regulator-dummy: no parameters
[    0.147351] RTC time: 18:37:38, date: 03/09/15
[    0.147390] NET: Registered protocol family 16
[    0.147511] cpuidle: using governor ladder
[    0.147513] cpuidle: using governor menu
[    0.147557] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.147559] ACPI: bus type PCI registered
[    0.147561] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.147635] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.147638] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.198659] PCI: Using configuration type 1 for base access
[    0.199726] bio: create slab <bio-0> at 0
[    0.199908] ACPI: Added _OSI(Module Device)
[    0.199910] ACPI: Added _OSI(Processor Device)
[    0.199912] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.199914] ACPI: Added _OSI(Processor Aggregator Device)
[    0.203200] ACPI: Executed 1 blocks of module-level executable AML code
[    0.206751] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.207522] ACPI: SSDT 00000000a6bec018 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20111123)
[    0.207956] ACPI: Dynamic OEM Table Load:
[    0.207958] ACPI: SSDT           (null) 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20111123)
[    0.211011] ACPI: SSDT 00000000a6beda98 000303 (v01  PmRef    ApIst 00003000 INTL 20111123)
[    0.211474] ACPI: Dynamic OEM Table Load:
[    0.211476] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20111123)
[    0.214828] ACPI: SSDT 00000000a6bebd98 000119 (v01  PmRef    ApCst 00003000 INTL 20111123)
[    0.215249] ACPI: Dynamic OEM Table Load:
[    0.215251] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20111123)
[    0.222856] ACPI: Interpreter enabled
[    0.222864] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.222870] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.222887] ACPI: (supports S0 S3 S4 S5)
[    0.222888] ACPI: Using IOAPIC for interrupt routing
[    0.222921] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.223085] ACPI: No dock devices found.
[    0.229178] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.229185] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.229334] \_SB_.PCI0:_OSC invalid UUID
[    0.229336] _OSC request data:1 1f 0 
[    0.229341] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.230028] PCI host bridge to bus 0000:00
[    0.230031] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.230034] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.230036] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.230038] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.230040] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
[    0.230051] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.230151] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.230166] pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc23fffff 64bit]
[    0.230174] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.230181] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.230305] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.230333] pci 0000:00:14.0: reg 0x10: [mem 0xc2600000-0xc260ffff 64bit]
[    0.230416] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.230466] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.230507] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.230535] pci 0000:00:16.0: reg 0x10: [mem 0xc2614000-0xc261400f 64bit]
[    0.230621] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.230726] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.231028] pci 0000:00:1a.0: reg 0x10: [mem 0xc2619000-0xc26193ff]
[    0.232691] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.232760] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.232802] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.232823] pci 0000:00:1b.0: reg 0x10: [mem 0xc2610000-0xc2613fff 64bit]
[    0.232904] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.232956] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.232994] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.233087] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.233139] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.233175] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.233268] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.233321] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.233358] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.233450] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.233502] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.233548] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[    0.233638] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.233691] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.233730] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.234017] pci 0000:00:1d.0: reg 0x10: [mem 0xc2618000-0xc26183ff]
[    0.235683] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.235753] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.235792] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.235985] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.236008] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
[    0.236019] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
[    0.236029] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
[    0.236040] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
[    0.236050] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.236061] pci 0000:00:1f.2: reg 0x24: [mem 0xc2617000-0xc26177ff]
[    0.236115] pci 0000:00:1f.2: PME# supported from D3hot
[    0.236190] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.236209] pci 0000:00:1f.3: reg 0x10: [mem 0xc2615000-0xc26150ff 64bit]
[    0.236234] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.236396] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.236507] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
[    0.236529] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.236672] pci 0000:03:00.0: supports D1 D2
[    0.236674] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[    0.236709] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.236761] pci 0000:03:00.1: [10ec:5209] type 00 class 0x080500
[    0.236781] pci 0000:03:00.1: reg 0x10: [mem 0x00000000-0x000000ff]
[    0.236922] pci 0000:03:00.1: supports D1 D2
[    0.236924] pci 0000:03:00.1: PME# supported from D1 D2 D3hot
[    0.242895] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.242900] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.242906] pci 0000:00:1c.1:   bridge window [mem 0xc1000000-0xc1ffffff]
[    0.242913] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.243050] pci 0000:04:00.0: [14e4:1692] type 00 class 0x020000
[    0.243088] pci 0000:04:00.0: reg 0x10: [mem 0xc2500000-0xc250ffff 64bit]
[    0.243271] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    0.243320] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.250920] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.250928] pci 0000:00:1c.2:   bridge window [mem 0xc2500000-0xc25fffff]
[    0.251032] pci 0000:09:00.0: [168c:0034] type 00 class 0x028000
[    0.251063] pci 0000:09:00.0: reg 0x10: [mem 0xc2400000-0xc247ffff 64bit]
[    0.251134] pci 0000:09:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.251207] pci 0000:09:00.0: supports D1 D2
[    0.251209] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.251247] pci 0000:09:00.0: System wakeup disabled by ACPI
[    0.258897] pci 0000:00:1c.7: PCI bridge to [bus 09]
[    0.258905] pci 0000:00:1c.7:   bridge window [mem 0xc2400000-0xc24fffff]
[    0.259473] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.259538] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.259600] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.259661] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.259722] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.259782] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.259843] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.259903] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.260210] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.260218] ACPI: \_SB_.PCI0: notify handler is installed
[    0.260307] Found 1 acpi root devices
[    0.260511] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.260669] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.260676] vgaarb: loaded
[    0.260677] vgaarb: bridge control possible 0000:00:02.0
[    0.260860] SCSI subsystem initialized
[    0.260922] libata version 3.00 loaded.
[    0.260962] ACPI: bus type USB registered
[    0.260982] usbcore: registered new interface driver usbfs
[    0.260992] usbcore: registered new interface driver hub
[    0.261023] usbcore: registered new device driver usb
[    0.261149] PCI: Using ACPI for IRQ routing
[    0.268807] PCI: pci_cache_line_size set to 64 bytes
[    0.268948] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.268951] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.268952] e820: reserve RAM buffer [mem 0xa0db0000-0xa3ffffff]
[    0.268954] e820: reserve RAM buffer [mem 0xa67bf000-0xa7ffffff]
[    0.268958] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
[    0.268960] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
[    0.269056] NetLabel: Initializing
[    0.269058] NetLabel:  domain hash size = 128
[    0.269059] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.269074] NetLabel:  unlabeled traffic allowed by default
[    0.269145] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.269152] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.271190] Switched to clocksource hpet
[    0.276465] AppArmor: AppArmor Filesystem Enabled
[    0.276492] pnp: PnP ACPI init
[    0.276507] ACPI: bus type PNP registered
[    0.276554] pnp 00:00: [dma 4]
[    0.276579] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.276604] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.276732] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.276768] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.276824] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.276828] system 00:04: [io  0x1100-0x110f] has been reserved
[    0.276830] system 00:04: [io  0xffff] has been reserved
[    0.276832] system 00:04: [io  0xffff] has been reserved
[    0.276835] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.276837] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.276840] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.276842] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.276846] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.276874] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.276927] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.276931] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.276969] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.276994] pnp 00:08: Plug and Play ACPI device, IDs ETD0508 PNP0f13 (active)
[    0.277144] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.277147] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.277149] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.277152] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.277155] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.277157] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.277159] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.277162] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.277165] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.277167] system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved
[    0.277170] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.277448] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[    0.277451] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
[    0.277454] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.277495] pnp: PnP ACPI: found 11 devices
[    0.277496] ACPI: bus type PNP unregistered
[    0.284305] pci 0000:09:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.284353] pci 0000:00:1c.7: BAR 15: assigned [mem 0xafb00000-0xafbfffff pref]
[    0.284356] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.284374] pci 0000:03:00.0: BAR 0: assigned [mem 0xc1000000-0xc1000fff]
[    0.284382] pci 0000:03:00.1: BAR 0: assigned [mem 0xc1001000-0xc10010ff]
[    0.284389] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.284393] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.284399] pci 0000:00:1c.1:   bridge window [mem 0xc1000000-0xc1ffffff]
[    0.284405] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.284412] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.284419] pci 0000:00:1c.2:   bridge window [mem 0xc2500000-0xc25fffff]
[    0.284431] pci 0000:09:00.0: BAR 6: assigned [mem 0xafb00000-0xafb0ffff pref]
[    0.284433] pci 0000:00:1c.7: PCI bridge to [bus 09]
[    0.284439] pci 0000:00:1c.7:   bridge window [mem 0xc2400000-0xc24fffff]
[    0.284445] pci 0000:00:1c.7:   bridge window [mem 0xafb00000-0xafbfffff pref]
[    0.284454] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.284456] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.284458] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.284461] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
[    0.284463] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.284465] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc1ffffff]
[    0.284468] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.284470] pci_bus 0000:04: resource 1 [mem 0xc2500000-0xc25fffff]
[    0.284473] pci_bus 0000:09: resource 1 [mem 0xc2400000-0xc24fffff]
[    0.284475] pci_bus 0000:09: resource 2 [mem 0xafb00000-0xafbfffff pref]
[    0.284511] NET: Registered protocol family 2
[    0.284746] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.284850] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.284923] TCP: Hash tables configured (established 32768 bind 32768)
[    0.284943] TCP: reno registered
[    0.284952] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.284973] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.285047] NET: Registered protocol family 1
[    0.285059] pci 0000:00:02.0: Boot video device
[    0.315350] PCI: CLS 64 bytes, default 64
[    0.315406] Trying to unpack rootfs image as initramfs...
[    0.359508] pci 0000:03:00.0: no hotplug settings from platform
[    0.359522] pci 0000:03:00.1: no hotplug settings from platform
[    0.928291] Freeing initrd memory: 28300K (ffff8800348aa000 - ffff88003644d000)
[    0.928298] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.928301] software IO TLB [mem 0x9b1c0000-0x9f1c0000] (64MB) mapped at [ffff88009b1c0000-ffff88009f1bffff]
[    0.928366] Simple Boot Flag at 0x44 set to 0x1
[    0.928581] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[    0.928590] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[    0.928594] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[    0.928604] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[    0.928668] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.928671] Scanning for low memory corruption every 60 seconds
[    0.928990] Initialise system trusted keyring
[    0.929042] audit: initializing netlink socket (disabled)
[    0.929053] type=2000 audit(1425926258.912:1): initialized
[    0.965683] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.966848] zbud: loaded
[    0.967043] VFS: Disk quotas dquot_6.5.2
[    0.967089] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.967569] fuse init (API version 7.22)
[    0.967651] msgmni has been set to 7535
[    0.967710] Key type big_key registered
[    0.968214] Key type asymmetric registered
[    0.968216] Asymmetric key parser 'x509' registered
[    0.968249] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.968293] io scheduler noop registered
[    0.968295] io scheduler deadline registered (default)
[    0.968321] io scheduler cfq registered
[    0.968394] pcieport 0000:00:1c.0: device [8086:1e10] has invalid IRQ; check vendor BIOS
[    0.968574] pcieport 0000:00:1c.1: device [8086:1e12] has invalid IRQ; check vendor BIOS
[    0.968709] pcieport 0000:00:1c.2: device [8086:1e14] has invalid IRQ; check vendor BIOS
[    0.968912] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.968927] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.968976] efifb: probing for efifb
[    0.969821] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010780000, using 4160k, total 4160k
[    0.969823] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    0.969824] efifb: scrolling: redraw
[    0.969826] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.973459] Console: switching to colour frame buffer device 170x48
[    0.976880] fb0: EFI VGA frame buffer device
[    0.976893] intel_idle: MWAIT substates: 0x21120
[    0.976895] intel_idle: v0.4 model 0x3A
[    0.976896] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.977015] ipmi message handler version 39.2
[    0.977107] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.977194] ACPI: AC Adapter [ACAD] (on-line)
[    0.977358] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.977363] ACPI: Power Button [PWRB]
[    0.977397] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.977400] ACPI: Sleep Button [SLPB]
[    0.977434] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    0.977452] ACPI: Lid Switch [LID]
[    0.977485] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.977488] ACPI: Power Button [PWRF]
[    0.977954] thermal LNXTHERM:00: registered as thermal_zone0
[    0.977957] ACPI: Thermal Zone [THRM] (55 C)
[    0.977988] GHES: HEST is not enabled!
[    0.978094] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.978700] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.978706] ACPI: Battery Slot [BAT1] (battery present)
[    0.979750] Linux agpgart interface v0.103
[    0.981083] brd: module loaded
[    0.981798] loop: module loaded
[    0.982167] libphy: Fixed MDIO Bus: probed
[    0.982254] tun: Universal TUN/TAP device driver, 1.6
[    0.982255] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.982303] PPP generic driver version 2.4.2
[    0.982344] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.982348] ehci-pci: EHCI PCI platform driver
[    0.982484] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.982491] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.982507] ehci-pci 0000:00:1a.0: debug port 2
[    0.986402] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.986420] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc2619000
[    0.994978] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.995025] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.995028] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.995030] usb usb1: Product: EHCI Host Controller
[    0.995032] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.995034] usb usb1: SerialNumber: 0000:00:1a.0
[    0.995152] hub 1-0:1.0: USB hub found
[    0.995160] hub 1-0:1.0: 2 ports detected
[    0.995366] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.995371] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.995386] ehci-pci 0000:00:1d.0: debug port 2
[    0.999276] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.999291] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc2618000
[    1.010971] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.011015] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.011018] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.011020] usb usb2: Product: EHCI Host Controller
[    1.011022] usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    1.011023] usb usb2: SerialNumber: 0000:00:1d.0
[    1.011197] hub 2-0:1.0: USB hub found
[    1.011206] hub 2-0:1.0: 2 ports detected
[    1.011301] ehci-platform: EHCI generic platform driver
[    1.011309] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.011311] ohci-pci: OHCI PCI platform driver
[    1.011320] ohci-platform: OHCI generic platform driver
[    1.011329] uhci_hcd: USB Universal Host Controller Interface driver
[    1.011477] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.011484] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.011587] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.011614] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
[    1.011687] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.011689] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.011691] usb usb3: Product: xHCI Host Controller
[    1.011693] usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    1.011695] usb usb3: SerialNumber: 0000:00:14.0
[    1.011878] hub 3-0:1.0: USB hub found
[    1.011892] hub 3-0:1.0: 4 ports detected
[    1.012062] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.012066] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.012108] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.012110] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.012112] usb usb4: Product: xHCI Host Controller
[    1.012114] usb usb4: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    1.012116] usb usb4: SerialNumber: 0000:00:14.0
[    1.012304] hub 4-0:1.0: USB hub found
[    1.012318] hub 4-0:1.0: 4 ports detected
[    1.019119] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.020346] i8042: Detected active multiplexing controller, rev 1.1
[    1.021016] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.021023] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.021048] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.021068] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.021087] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.021342] mousedev: PS/2 mouse device common for all mice
[    1.021743] rtc_cmos 00:05: RTC can wake from S4
[    1.021881] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.021914] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.021983] device-mapper: uevent: version 1.0.3
[    1.022061] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.022069] ledtrig-cpu: registered to indicate activity on CPUs
[    1.022071] EFI Variables Facility v0.08 2004-May-17
[    1.032862] TCP: cubic registered
[    1.032956] NET: Registered protocol family 10
[    1.033147] NET: Registered protocol family 17
[    1.033159] Key type dns_resolver registered
[    1.033496] Loading compiled-in X.509 certificates
[    1.034691] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
[    1.034705] registered taskstats version 1
[    1.037559] Key type trusted registered
[    1.039953] Key type encrypted registered
[    1.041712] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.042314] AppArmor: AppArmor sha1 policy hashing enabled
[    1.042319] IMA: No TPM chip found, activating TPM-bypass!
[    1.042733] regulator-dummy: disabling
[    1.042795]   Magic number: 7:148:645
[    1.042890] rtc_cmos 00:05: setting system clock to 2015-03-09 18:37:39 UTC (1425926259)
[    1.043662] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.043664] EDD information not available.
[    1.043736] PM: Hibernation image not present or could not be loaded.
[    1.044759] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    1.044761] Write protecting the kernel read-only data: 12288k
[    1.047403] Freeing unused kernel memory: 804K (ffff880002737000 - ffff880002800000)
[    1.049542] Freeing unused kernel memory: 692K (ffff880002b53000 - ffff880002c00000)
[    1.064292] systemd-udevd[125]: starting version 204
[    1.080744] wmi: Mapper loaded
[    1.091335] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
[    1.091451] rtsx_pci 0000:03:00.0: irq 41 for MSI/MSI-X
[    1.091468] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
[    1.092383] sdhci: Secure Digital Host Controller Interface driver
[    1.092387] sdhci: Copyright(c) Pierre Ossman
[    1.095034] sdhci-pci 0000:03:00.1: SDHCI controller found [10ec:5209] (rev 1)
[    1.095051] sdhci-pci 0000:03:00.1: enabling device (0000 -> 0002)
[    1.095134] sdhci-pci 0000:03:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.095144] sdhci-pci 0000:03:00.1: dummy supplies not allowed
[    1.095147] mmc0: no vqmmc regulator found
[    1.095150] sdhci-pci 0000:03:00.1: dummy supplies not allowed
[    1.095151] mmc0: no vmmc regulator found
[    1.095159] sdhci-pci 0000:03:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.095254] mmc0: SDHCI controller on PCI [0000:03:00.1] using DMA
[    1.097758] pps_core: LinuxPPS API ver. 1 registered
[    1.097762] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.097791] [drm] Initialized drm 1.1.0 20060810
[    1.099398] PTP clock support registered
[    1.102084] ahci 0000:00:1f.2: version 3.0
[    1.102290] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    1.103002] tg3.c:v3.134 (Sep 16, 2013)
[    1.115479] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode
[    1.115487] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.132753] scsi0 : ahci
[    1.132873] scsi1 : ahci
[    1.133589] scsi2 : ahci
[    1.134752] scsi3 : ahci
[    1.136343] scsi4 : ahci
[    1.136359] libphy: tg3 mdio bus: probed
[    1.137790] scsi5 : ahci
[    1.137873] ata1: SATA max UDMA/133 abar m2048@0xc2617000 port 0xc2617100 irq 42
[    1.137879] ata2: SATA max UDMA/133 abar m2048@0xc2617000 port 0xc2617180 irq 42
[    1.137882] ata3: DUMMY
[    1.137884] ata4: DUMMY
[    1.137886] ata5: DUMMY
[    1.137890] ata6: SATA max UDMA/133 abar m2048@0xc2617000 port 0xc2617380 irq 42
[    1.140652] [drm] Memory usable by graphics device = 2048M
[    1.140658] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[    1.140661] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[    1.140680] Console: switching to colour dummy device 80x25
[    1.146574] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 08:9e:01:43:f2:eb
[    1.146579] tg3 0000:04:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=400:01)
[    1.146581] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.146584] tg3 0000:04:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.219019] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    1.219034] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.219035] [drm] Driver supports precise vblank timestamp query.
[    1.219168] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.306992] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.330916] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    1.348819] fbcon: inteldrmfb (fb0) is primary device
[    1.439262] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.439264] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.439679] hub 1-1:1.0: USB hub found
[    1.439869] hub 1-1:1.0: 6 ports detected
[    1.454908] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.454933] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.454951] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.455776] ata2.00: ATA-8: SATA SSD, S5FAM018, max UDMA/100
[    1.455778] ata2.00: 39091248 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.456841] ata2.00: configured for UDMA/100
[    1.458582] ata6.00: ATAPI: HL-DT-ST DVDRAM GU61N, 2.00, max UDMA/133
[    1.458850] ata1.00: ATA-8: ST500LT012-9WS142, 0001SDM1, max UDMA/133
[    1.458852] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.460029] ata6.00: configured for UDMA/133
[    1.504760] ata1.00: configured for UDMA/133
[    1.505019] scsi 0:0:0:0: Direct-Access     ATA      ST500LT012-9WS14 0001 PQ: 0 ANSI: 5
[    1.505327] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.505329] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.505332] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.505524] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    1.505592] sd 0:0:0:0: [sda] Write Protect is off
[    1.505596] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.505673] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.505678] scsi 1:0:0:0: Direct-Access     ATA      SATA SSD         S5FA PQ: 0 ANSI: 5
[    1.505933] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.506058] sd 1:0:0:0: [sdb] 39091248 512-byte logical blocks: (20.0 GB/18.6 GiB)
[    1.506203] sd 1:0:0:0: [sdb] Write Protect is off
[    1.506205] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.506280] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.508391]  sdb: sdb1
[    1.508834] scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GU61N     2.00 PQ: 0 ANSI: 5
[    1.508913] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.511551] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.511553] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.511716] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.511812] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    1.539558]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    1.540534] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.550822] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.683400] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.683402] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.683687] hub 2-1:1.0: USB hub found
[    1.683755] hub 2-1:1.0: 8 ports detected
[    1.693496] psmouse serio2: elantech: assuming hardware version 4 (with firmware version 0x461f08)
[    1.705994] psmouse serio2: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0e.
[    1.767807] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input10
[    1.850802] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[    1.870196] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b
[    1.870198] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.870199] usb 3-2: Product: USB Receiver
[    1.870200] usb 3-2: Manufacturer: Logitech
[    1.875166] hidraw: raw HID events driver (C) Jiri Kosina
[    1.883678] usbcore: registered new interface driver usbhid
[    1.883679] usbhid: USB HID core driver
[    1.887774] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
[    1.891293] input: Logitech Unifying Device. Wireless PID:401b as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/input/input13
[    1.891445] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:401b] on usb-0000:00:14.0-2:1
[    1.893401] input: Logitech Unifying Device. Wireless PID:4016 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/input/input14
[    1.893515] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4016] on usb-0000:00:14.0-2:2
[    1.926711] tsc: Refined TSC clocksource calibration: 1795.921 MHz
[    1.942835] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.093986] usb 1-1.1: New USB device found, idVendor=1bcf, idProduct=2c32
[    2.093988] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.093989] usb 1-1.1: Product: HD WebCam
[    2.093991] usb 1-1.1: Manufacturer: NC.21411.01123505CACLM0629
[    2.234869] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[    2.328545] usb 1-1.3: string descriptor 0 read error: -22
[    2.328561] usb 1-1.3: New USB device found, idVendor=0489, idProduct=e04e
[    2.328563] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.529205] [drm:intel_dp_start_link_train] *ERROR* too many voltage retries, give up
[    2.830832] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    2.926459] Switched to clocksource tsc
[    2.930445] Console: switching to colour frame buffer device 170x48
[    2.933806] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.933808] i915 0000:00:02.0: registered panic notifier
[    2.939185] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.939604] acpi device:3a: registered as cooling_device4
[    2.939680] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15
[    2.939806] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.101565] random: nonblocking pool is initialized
[    3.303657] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   11.155269] Adding 3999740k swap on /dev/sda5.  Priority:-1 extents:1 across:3999740k FS
[   11.200523] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.282655] systemd-udevd[390]: starting version 204
[   11.364379] lp: driver loaded but no devices found
[   11.370764] ppdev: user-space parallel port driver
[   11.425637] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[   11.436836] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.438369] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   11.438380] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.438386] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   11.438391] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.438394] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   11.438399] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.438401] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.457265] cfg80211: Calling CRDA to update world regulatory domain
[   11.524462] ath: phy0: ASPM enabled: 0x42
[   11.524468] ath: EEPROM regdomain: 0x6c
[   11.524470] ath: EEPROM indicates we should expect a direct regpair map
[   11.524474] ath: Country alpha2 being used: 00
[   11.524476] ath: Regpair used: 0x6c
[   11.554034] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.556786] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90010880000, irq=19
[   11.615481] device-mapper: multipath: version 1.6.0 loaded
[   11.635348] Bluetooth: Core ver 2.17
[   11.635402] NET: Registered protocol family 31
[   11.635406] Bluetooth: HCI device and connection manager initialized
[   11.635415] Bluetooth: HCI socket layer initialized
[   11.635419] Bluetooth: L2CAP socket layer initialized
[   11.635426] Bluetooth: SCO socket layer initialized
[   11.639304] usbcore: registered new interface driver btusb
[   11.664901] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   11.676526] SKU: Nid=0x1d sku_cfg=0x4007992d
[   11.676529] SKU: port_connectivity=0x1
[   11.676531] SKU: enable_pcbeep=0x0
[   11.676533] SKU: check_sum=0x00000007
[   11.676536] SKU: customization=0x00000099
[   11.676537] SKU: external_amp=0x5
[   11.676539] SKU: platform_type=0x1
[   11.676541] SKU: swap=0x0
[   11.676543] SKU: override=0x1
[   11.677150] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   11.677154]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.677157]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   11.677159]    mono: mono_out=0x0
[   11.677160]    inputs:
[   11.677163]      Mic=0x12
[   11.677165] realtek: No valid SSID, checking pincfg 0x4007992d for NID 0x1d
[   11.677168] realtek: Enabling init ASM_ID=0x992d CODEC_ID=10ec0269
[   11.686330] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   11.686431] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   11.723428] Linux video capture interface: v2.00
[   11.733313] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c32)
[   11.741701] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input18
[   11.741781] usbcore: registered new interface driver uvcvideo
[   11.741783] USB Video Class driver (1.1.1)
[   11.779581] intel_rapl: domain uncore energy ctr 178924:178924 not working, skip
[   11.894517] acer_wmi: Acer Laptop ACPI-WMI Extras
[   11.894653] acer_wmi: Function bitmap for Communication Button: 0x801
[   11.894936] acer_wmi: Brightness must be controlled by acpi video driver
[   11.926753] input: Acer WMI hotkeys as /devices/virtual/input/input19
[   11.929069] input: Acer BMA150 accelerometer as /devices/virtual/input/input20
[   11.974097] usbcore: registered new interface driver ath3k
[   11.992141] usb 1-1.3: USB disconnect, device number 4
[   12.027244] cfg80211: World regulatory domain updated:
[   12.027249] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.027251] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.027253] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.027255] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.027257] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.027258] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.191588] usb 1-1.3: new full-speed USB device number 5 using ehci-pci
[   12.285181] usb 1-1.3: string descriptor 0 read error: -22
[   12.285205] usb 1-1.3: New USB device found, idVendor=0489, idProduct=e04e
[   12.285208] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   12.422306] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   13.012146] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   13.750150] init: failsafe main process (827) killed by TERM signal
[   14.628996] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.629002] Bluetooth: BNEP filters: protocol multicast
[   14.629012] Bluetooth: BNEP socket layer initialized
[   14.630419] Bluetooth: RFCOMM TTY layer initialized
[   14.630432] Bluetooth: RFCOMM socket layer initialized
[   14.630438] Bluetooth: RFCOMM ver 1.11
[   15.040898] init: cups main process (920) killed by HUP signal
[   15.040913] init: cups main process ended, respawning
[   16.402295] tg3 0000:04:00.0: irq 46 for MSI/MSI-X
[   16.413294] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.413652] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.426955] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.430251] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.627933] init: samba-ad-dc main process (973) terminated with status 1
[   17.139212] tg3 0000:04:00.0 eth0: Link is down
[   18.294260] init: plymouth-upstart-bridge main process ended, respawning
[   18.300341] init: plymouth-upstart-bridge main process (1440) terminated with status 1
[   18.300356] init: plymouth-upstart-bridge main process ended, respawning
[   18.681028] init: plymouth-stop pre-start process (1503) terminated with status 1
[   19.944380] wlan0: authenticate with 1c:af:f7:d1:68:5b
[   19.957206] wlan0: send auth to 1c:af:f7:d1:68:5b (try 1/3)
[   19.959070] wlan0: authenticated
[   19.959252] ath9k 0000:09:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   19.960965] wlan0: associate with 1c:af:f7:d1:68:5b (try 1/3)
[   19.968728] wlan0: RX AssocResp from 1c:af:f7:d1:68:5b (capab=0x431 status=0 aid=2)
[   19.969037] wlan0: associated
[   19.969077] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

 

 

Acá ha otro dmesg de Debian parecido al primero (también con errores pero más lento)

 

 

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=c05302c7-f6cc-4485-94fa-c561892b367c ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a0daffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a0db0000-0x00000000a21affff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a21b0000-0x00000000a67befff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a67bf000-0x00000000a68e7fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a68e8000-0x00000000a68e8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a68e9000-0x00000000a68f2fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a68f3000-0x00000000a68f3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a68f4000-0x00000000a68fafff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a68fb000-0x00000000a68fbfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a68fc000-0x00000000a6911fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a6912000-0x00000000a6912fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6913000-0x00000000a6917fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a6918000-0x00000000a6918fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6919000-0x00000000a6926fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a6927000-0x00000000a6927fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6928000-0x00000000a692cfff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a692d000-0x00000000a692dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a692e000-0x00000000a69befff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a69bf000-0x00000000a6ebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by INSYDE Corp.
[    0.000000] efi:  ACPI=0xa6ffe000  ACPI 2.0=0xa6ffe014  SMBIOS=0xa6ebef98 
[    0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[    0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB)
[    0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[    0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[    0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001016000) (15MB)
[    0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000001016000-0x0000000001200000) (1MB)
[    0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001200000-0x0000000002116000) (15MB)
[    0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000002116000-0x0000000020000000) (478MB)
[    0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[    0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x0000000036456000) (354MB)
[    0.000000] efi: mem11: type=2, attr=0xf, range=[0x0000000036456000-0x0000000037223000) (13MB)
[    0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000037223000-0x0000000040004000) (141MB)
[    0.000000] efi: mem13: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[    0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000040005000-0x0000000076cb0000) (876MB)
[    0.000000] efi: mem15: type=2, attr=0xf, range=[0x0000000076cb0000-0x000000009f1c0000) (645MB)
[    0.000000] efi: mem16: type=4, attr=0xf, range=[0x000000009f1c0000-0x000000009f1e0000) (0MB)
[    0.000000] efi: mem17: type=7, attr=0xf, range=[0x000000009f1e0000-0x000000009fd78000) (11MB)
[    0.000000] efi: mem18: type=2, attr=0xf, range=[0x000000009fd78000-0x000000009ff4c000) (1MB)
[    0.000000] efi: mem19: type=4, attr=0xf, range=[0x000000009ff4c000-0x00000000a0db0000) (14MB)
[    0.000000] efi: mem20: type=0, attr=0xf, range=[0x00000000a0db0000-0x00000000a21b0000) (20MB)
[    0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000a21b0000-0x00000000a21bd000) (0MB)
[    0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000a21bd000-0x00000000a21bf000) (0MB)
[    0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000a21bf000-0x00000000a228b000) (0MB)
[    0.000000] efi: mem24: type=1, attr=0xf, range=[0x00000000a228b000-0x00000000a23bf000) (1MB)
[    0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000a23bf000-0x00000000a3a8d000) (22MB)
[    0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000a3a8d000-0x00000000a3f0e000) (4MB)
[    0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000a3f0e000-0x00000000a3fb2000) (0MB)
[    0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000a3fb2000-0x00000000a4408000) (4MB)
[    0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000a4408000-0x00000000a440d000) (0MB)
[    0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000a440d000-0x00000000a440f000) (0MB)
[    0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000a440f000-0x00000000a4411000) (0MB)
[    0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000a4411000-0x00000000a4446000) (0MB)
[    0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000a4446000-0x00000000a444b000) (0MB)
[    0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000a444b000-0x00000000a4455000) (0MB)
[    0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000a4455000-0x00000000a4456000) (0MB)
[    0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000a4456000-0x00000000a447c000) (0MB)
[    0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000a447c000-0x00000000a447e000) (0MB)
[    0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000a447e000-0x00000000a45a8000) (1MB)
[    0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000a45a8000-0x00000000a45ad000) (0MB)
[    0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000a45ad000-0x00000000a45b0000) (0MB)
[    0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000a45b0000-0x00000000a45b1000) (0MB)
[    0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000a45b1000-0x00000000a45f5000) (0MB)
[    0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000a45f5000-0x00000000a4659000) (0MB)
[    0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000a4659000-0x00000000a465b000) (0MB)
[    0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000a465b000-0x00000000a465c000) (0MB)
[    0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000a465c000-0x00000000a46e2000) (0MB)
[    0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000a46e2000-0x00000000a46e3000) (0MB)
[    0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000a46e3000-0x00000000a49e2000) (2MB)
[    0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000a49e2000-0x00000000a49ec000) (0MB)
[    0.000000] efi: mem50: type=4, attr=0xf, range=[0x00000000a49ec000-0x00000000a63bf000) (25MB)
[    0.000000] efi: mem51: type=7, attr=0xf, range=[0x00000000a63bf000-0x00000000a64d3000) (1MB)
[    0.000000] efi: mem52: type=2, attr=0xf, range=[0x00000000a64d3000-0x00000000a64df000) (0MB)
[    0.000000] efi: mem53: type=3, attr=0xf, range=[0x00000000a64df000-0x00000000a67bf000) (2MB)
[    0.000000] efi: mem54: type=5, attr=0x800000000000000f, range=[0x00000000a67bf000-0x00000000a68da000) (1MB)
[    0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000a68da000-0x00000000a68e8000) (0MB)
[    0.000000] efi: mem56: type=6, attr=0x800000000000000f, range=[0x00000000a68e8000-0x00000000a68e9000) (0MB)
[    0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000a68e9000-0x00000000a68f3000) (0MB)
[    0.000000] efi: mem58: type=6, attr=0x800000000000000f, range=[0x00000000a68f3000-0x00000000a68f4000) (0MB)
[    0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000a68f4000-0x00000000a68fb000) (0MB)
[    0.000000] efi: mem60: type=6, attr=0x800000000000000f, range=[0x00000000a68fb000-0x00000000a68fc000) (0MB)
[    0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000a68fc000-0x00000000a6912000) (0MB)
[    0.000000] efi: mem62: type=6, attr=0x800000000000000f, range=[0x00000000a6912000-0x00000000a6913000) (0MB)
[    0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000a6913000-0x00000000a6918000) (0MB)
[    0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x00000000a6918000-0x00000000a6919000) (0MB)
[    0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000a6919000-0x00000000a6927000) (0MB)
[    0.000000] efi: mem66: type=6, attr=0x800000000000000f, range=[0x00000000a6927000-0x00000000a6928000) (0MB)
[    0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000a6928000-0x00000000a692d000) (0MB)
[    0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x00000000a692d000-0x00000000a692e000) (0MB)
[    0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000a692e000-0x00000000a69bf000) (0MB)
[    0.000000] efi: mem70: type=6, attr=0x800000000000000f, range=[0x00000000a69bf000-0x00000000a6abf000) (1MB)
[    0.000000] efi: mem71: type=0, attr=0xf, range=[0x00000000a6abf000-0x00000000a6bc8000) (1MB)
[    0.000000] efi: mem72: type=0, attr=0xf, range=[0x00000000a6bc8000-0x00000000a6ebf000) (2MB)
[    0.000000] efi: mem73: type=10, attr=0xf, range=[0x00000000a6ebf000-0x00000000a6fa2000) (0MB)
[    0.000000] efi: mem74: type=10, attr=0xf, range=[0x00000000a6fa2000-0x00000000a6fbf000) (0MB)
[    0.000000] efi: mem75: type=9, attr=0xf, range=[0x00000000a6fbf000-0x00000000a6fdb000) (0MB)
[    0.000000] efi: mem76: type=9, attr=0xf, range=[0x00000000a6fdb000-0x00000000a6fff000) (0MB)
[    0.000000] efi: mem77: type=4, attr=0xf, range=[0x00000000a6fff000-0x00000000a7000000) (0MB)
[    0.000000] efi: mem78: type=7, attr=0xf, range=[0x0000000100000000-0x000000014f600000) (1270MB)
[    0.000000] efi: mem79: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[    0.000000] efi: mem80: type=0, attr=0x0, range=[0x00000000a7000000-0x00000000afa00000) (138MB)
[    0.000000] efi: mem81: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[    0.000000] efi: mem82: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[    0.000000] efi: mem83: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[    0.000000] efi: mem84: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[    0.000000] efi: mem85: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[    0.000000] efi: mem86: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[    0.000000] efi: mem87: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000fff12000) (3MB)
[    0.000000] efi: mem88: type=11, attr=0x8000000000000000, range=[0x00000000fff12000-0x00000000fff40000) (0MB)
[    0.000000] efi: mem89: type=11, attr=0x8000000000000000, range=[0x00000000fff40000-0x0000000100000000) (0MB)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Acer Aspire M5-481T/MA40_HX, BIOS V2.11 11/02/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 0A0000000 mask FFC000000 write-back
[    0.000000]   3 base 0A4000000 mask FFE000000 write-back
[    0.000000]   4 base 0A6000000 mask FFF000000 write-back
[    0.000000]   5 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   6 base 100000000 mask F80000000 write-back
[    0.000000]   7 base 14F600000 mask FFFE00000 uncachable
[    0.000000]   8 base 14F800000 mask FFF800000 uncachable
[    0.000000]   9 base 150000000 mask FF0000000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff88000007c000] 7c000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01cf2000, 0x01cf2fff] PGTABLE
[    0.000000] BRK [0x01cf3000, 0x01cf3fff] PGTABLE
[    0.000000] BRK [0x01cf4000, 0x01cf4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x14f400000-0x14f5fffff]
[    0.000000]  [mem 0x14f400000-0x14f5fffff] page 2M
[    0.000000] BRK [0x01cf5000, 0x01cf5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14f3fffff]
[    0.000000]  [mem 0x14c000000-0x14f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
[    0.000000]  [mem 0x100000000-0x14bffffff] page 2M
[    0.000000] BRK [0x01cf6000, 0x01cf6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01cf7000, 0x01cf7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0xa0daffff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0xa0bfffff] page 2M
[    0.000000]  [mem 0xa0c00000-0xa0daffff] page 4k
[    0.000000] init_memory_mapping: [mem 0xa21b0000-0xa67befff]
[    0.000000]  [mem 0xa21b0000-0xa21fffff] page 4k
[    0.000000]  [mem 0xa2200000-0xa65fffff] page 2M
[    0.000000]  [mem 0xa6600000-0xa67befff] page 4k
[    0.000000] init_memory_mapping: [mem 0xa6fff000-0xa6ffffff]
[    0.000000]  [mem 0xa6fff000-0xa6ffffff] page 4k
[    0.000000] RAMDISK: [mem 0x36456000-0x37222fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000A6FFE014 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x00000000A6FFE210 0000A4 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000A6FFB000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DSDT 0x00000000A6FEC000 00B22C (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: FACS 0x00000000A6FBA000 000040
[    0.000000] ACPI: UEFI 0x00000000A6FFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASF! 0x00000000A6FFC000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: HPET 0x00000000A6FFA000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: APIC 0x00000000A6FF9000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MCFG 0x00000000A6FF8000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SLIC 0x00000000A6FEB000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: WDAT 0x00000000A6FEA000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000A6FE8000 001068 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: BOOT 0x00000000A6FE6000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASPT 0x00000000A6FE1000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: FPDT 0x00000000A6FDF000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MSDM 0x00000000A6FDE000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000A6FDD000 0008E4 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000A6FDC000 000A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: BGRT 0x00000000A6FDB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x14f5fffff]
[    0.000000]   NODE_DATA [mem 0x14f5f5000-0x14f5f9fff]
[    0.000000]  [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014ae00000-ffff88014e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x14f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00087fff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0xa0daffff]
[    0.000000]   node   0: [mem 0xa21b0000-0xa67befff]
[    0.000000]   node   0: [mem 0xa6fff000-0xa6ffffff]
[    0.000000]   node   0: [mem 0x100000000-0x14f5fffff]
[    0.000000] On node 0 totalpages: 1001286
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 24 pages reserved
[    0.000000]   DMA zone: 3975 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9191 pages used for memmap
[    0.000000]   DMA32 zone: 672191 pages, LIFO batch:31
[    0.000000]   Normal zone: 4445 pages used for memmap
[    0.000000]   Normal zone: 325120 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xa7a00000-0xaf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0db0000-0xa21affff]
[    0.000000] PM: Registered nosave memory: [mem 0xa67bf000-0xa68e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68e8000-0xa68e8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68e9000-0xa68f2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68f3000-0xa68f3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68f4000-0xa68fafff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68fb000-0xa68fbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xa68fc000-0xa6911fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6912000-0xa6912fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6913000-0xa6917fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6918000-0xa6918fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6919000-0xa6926fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6927000-0xa6927fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6928000-0xa692cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xa692d000-0xa692dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xa692e000-0xa69befff]
[    0.000000] PM: Registered nosave memory: [mem 0xa69bf000-0xa6ebefff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6ebf000-0xa6fbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6fbf000-0xa6ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xa7000000-0xaf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88014f200000 s81792 r8192 d20608 u262144
[    0.000000] pcpu-alloc: s81792 r8192 d20608 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 987570
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=c05302c7-f6cc-4485-94fa-c561892b367c ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3796312K/4005144K available (5201K kernel code, 943K rwdata, 1828K rodata, 1200K init, 840K bss, 208832K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1795.890 MHz processor
[    0.000046] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.78 BogoMIPS (lpj=7183560)
[    0.000050] pid_max: default: 32768 minimum: 301
[    0.000060] ACPI: Core revision 20140424
[    0.010052] ACPI: All ACPI Tables successfully acquired
[    0.035013] Security Framework initialized
[    0.035026] AppArmor: AppArmor disabled by boot time parameter
[    0.035027] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.035370] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.036817] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.037463] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.037470] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.037744] Initializing cgroup subsys memory
[    0.037751] Initializing cgroup subsys devices
[    0.037759] Initializing cgroup subsys freezer
[    0.037762] Initializing cgroup subsys net_cls
[    0.037767] Initializing cgroup subsys blkio
[    0.037772] Initializing cgroup subsys perf_event
[    0.037774] Initializing cgroup subsys net_prio
[    0.037806] CPU: Physical Processor ID: 0
[    0.037808] CPU: Processor Core ID: 0
[    0.037813] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.037817] mce: CPU supports 7 MCE banks
[    0.037833] CPU0: Thermal monitoring enabled (TM1)
[    0.037844] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[    0.037994] Freeing SMP alternatives memory: 20K (ffffffff81a19000 - ffffffff81a1e000)
[    0.041782] ftrace: allocating 21587 entries in 85 pages
[    0.054821] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.094494] smpboot: CPU0: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (fam: 06, model: 3a, stepping: 09)
[    0.094503] TSC deadline timer enabled
[    0.094534] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.094561] ... version:                3
[    0.094562] ... bit width:              48
[    0.094564] ... generic registers:      4
[    0.094565] ... value mask:             0000ffffffffffff
[    0.094566] ... max period:             0000ffffffffffff
[    0.094567] ... fixed-purpose events:   3
[    0.094568] ... event mask:             000000070000000f
[    0.096562] x86: Booting SMP configuration:
[    0.096565] .... node  #0, CPUs:      #1
[    0.109730] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.109863]  #2 #3
[    0.136282] x86: Booted up 1 node, 4 CPUs
[    0.136287] smpboot: Total of 4 processors activated (14367.12 BogoMIPS)
[    0.140473] devtmpfs: initialized
[    0.144042] PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes)
[    0.145216] pinctrl core: initialized pinctrl subsystem
[    0.145318] NET: Registered protocol family 16
[    0.145467] cpuidle: using governor ladder
[    0.145470] cpuidle: using governor menu
[    0.145525] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.145527] ACPI: bus type PCI registered
[    0.145529] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.145652] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.145655] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.146056] PCI: Using configuration type 1 for base access
[    0.156850] ACPI: Added _OSI(Module Device)
[    0.156853] ACPI: Added _OSI(Processor Device)
[    0.156855] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.156856] ACPI: Added _OSI(Processor Aggregator Device)
[    0.159973] ACPI: Executed 1 blocks of module-level executable AML code
[    0.175092] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.175941] ACPI: Dynamic OEM Table Load:
[    0.175954] ACPI: SSDT 0xFFFF88014A253000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20111123)
[    0.188614] ACPI: Dynamic OEM Table Load:
[    0.188624] ACPI: SSDT 0xFFFF880149C0BC00 000303 (v01 PmRef  ApIst    00003000 INTL 20111123)
[    0.203180] ACPI: Dynamic OEM Table Load:
[    0.203188] ACPI: SSDT 0xFFFF88014E83BE00 000119 (v01 PmRef  ApCst    00003000 INTL 20111123)
[    0.223207] ACPI: Interpreter enabled
[    0.223217] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.223223] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.223243] ACPI: (supports S0 S3 S4 S5)
[    0.223244] ACPI: Using IOAPIC for interrupt routing
[    0.223280] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.229477] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.229484] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.229650] \_SB_.PCI0:_OSC invalid UUID
[    0.229651] _OSC request data:1 1f 0 
[    0.229656] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.230408] PCI host bridge to bus 0000:00
[    0.230412] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.230414] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.230417] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.230419] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.230421] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
[    0.230430] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.230541] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.230556] pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc23fffff 64bit]
[    0.230564] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.230571] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.230701] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.230729] pci 0000:00:14.0: reg 0x10: [mem 0xc2600000-0xc260ffff 64bit]
[    0.230810] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.230857] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.230915] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.230943] pci 0000:00:16.0: reg 0x10: [mem 0xc2614000-0xc261400f 64bit]
[    0.231029] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.231138] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.231440] pci 0000:00:1a.0: reg 0x10: [mem 0xc2619000-0xc26193ff]
[    0.233097] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.233165] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.233224] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.233246] pci 0000:00:1b.0: reg 0x10: [mem 0xc2610000-0xc2613fff 64bit]
[    0.233335] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.233383] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.233436] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.233535] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.233586] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.233639] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.233735] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.233786] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.233840] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.233937] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.233988] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.234049] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[    0.234144] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.234195] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.234252] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.234538] pci 0000:00:1d.0: reg 0x10: [mem 0xc2618000-0xc26183ff]
[    0.236187] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.236252] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.236310] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.236520] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.236543] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
[    0.236554] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
[    0.236565] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
[    0.236576] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
[    0.236585] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.236596] pci 0000:00:1f.2: reg 0x24: [mem 0xc2617000-0xc26177ff]
[    0.236651] pci 0000:00:1f.2: PME# supported from D3hot
[    0.236742] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.236762] pci 0000:00:1f.3: reg 0x10: [mem 0xc2615000-0xc26150ff 64bit]
[    0.236787] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.236965] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.237080] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
[    0.237106] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.237254] pci 0000:03:00.0: supports D1 D2
[    0.237256] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[    0.237295] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.237361] pci 0000:03:00.1: [10ec:5209] type 00 class 0x080500
[    0.237384] pci 0000:03:00.1: reg 0x10: [mem 0x00000000-0x000000ff]
[    0.237537] pci 0000:03:00.1: supports D1 D2
[    0.237539] pci 0000:03:00.1: PME# supported from D1 D2 D3hot
[    0.244439] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.244445] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.244450] pci 0000:00:1c.1:   bridge window [mem 0xc1000000-0xc1ffffff]
[    0.244457] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.244603] pci 0000:04:00.0: [14e4:1692] type 00 class 0x020000
[    0.244644] pci 0000:04:00.0: reg 0x10: [mem 0xc2500000-0xc250ffff 64bit]
[    0.244871] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    0.244925] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.252462] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.252470] pci 0000:00:1c.2:   bridge window [mem 0xc2500000-0xc25fffff]
[    0.252581] pci 0000:09:00.0: [168c:0034] type 00 class 0x028000
[    0.252615] pci 0000:09:00.0: reg 0x10: [mem 0xc2400000-0xc247ffff 64bit]
[    0.252684] pci 0000:09:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.252777] pci 0000:09:00.0: supports D1 D2
[    0.252779] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.252817] pci 0000:09:00.0: System wakeup disabled by ACPI
[    0.260423] pci 0000:00:1c.7: PCI bridge to [bus 09]
[    0.260446] pci 0000:00:1c.7:   bridge window [mem 0xc2400000-0xc24fffff]
[    0.261034] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.261103] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.261167] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.261230] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.261293] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.261354] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.261416] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.261479] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.261710] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.261964] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.262097] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.262100] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.262103] vgaarb: loaded
[    0.262105] vgaarb: bridge control possible 0000:00:02.0
[    0.262308] PCI: Using ACPI for IRQ routing
[    0.269839] PCI: pci_cache_line_size set to 64 bytes
[    0.269976] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.269979] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.269980] e820: reserve RAM buffer [mem 0xa0db0000-0xa3ffffff]
[    0.269982] e820: reserve RAM buffer [mem 0xa67bf000-0xa7ffffff]
[    0.269986] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
[    0.269987] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
[    0.270170] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.270176] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.272208] Switched to clocksource hpet
[    0.278404] pnp: PnP ACPI init
[    0.278425] ACPI: bus type PNP registered
[    0.278584] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.278587] system 00:00: [io  0x1100-0x110f] has been reserved
[    0.278590] system 00:00: [io  0xffff] has been reserved
[    0.278592] system 00:00: [io  0xffff] has been reserved
[    0.278594] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.278597] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.278600] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.278602] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.278606] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.278648] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.278714] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.278717] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.278753] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.278787] pnp 00:04: Plug and Play ACPI device, IDs ETD0508 PNP0f13 (active)
[    0.278958] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.278961] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.278963] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.278966] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.278968] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.278971] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.278973] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.278976] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.278979] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.278981] system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved
[    0.278984] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.279279] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.279282] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[    0.279284] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.279326] pnp: PnP ACPI: found 7 devices
[    0.279328] ACPI: bus type PNP unregistered
[    0.286467] pci 0000:09:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.286511] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.286529] pci 0000:03:00.0: BAR 0: assigned [mem 0xc1000000-0xc1000fff]
[    0.286537] pci 0000:03:00.1: BAR 0: assigned [mem 0xc1001000-0xc10010ff]
[    0.286544] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.286548] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.286554] pci 0000:00:1c.1:   bridge window [mem 0xc1000000-0xc1ffffff]
[    0.286560] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.286567] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.286573] pci 0000:00:1c.2:   bridge window [mem 0xc2500000-0xc25fffff]
[    0.286585] pci 0000:09:00.0: BAR 6: assigned [mem 0xc2480000-0xc248ffff pref]
[    0.286587] pci 0000:00:1c.7: PCI bridge to [bus 09]
[    0.286593] pci 0000:00:1c.7:   bridge window [mem 0xc2400000-0xc24fffff]
[    0.286604] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.286606] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.286608] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.286610] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
[    0.286613] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.286615] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc1ffffff]
[    0.286617] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
[    0.286619] pci_bus 0000:04: resource 1 [mem 0xc2500000-0xc25fffff]
[    0.286621] pci_bus 0000:09: resource 1 [mem 0xc2400000-0xc24fffff]
[    0.286697] NET: Registered protocol family 2
[    0.286984] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.287086] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.287163] TCP: Hash tables configured (established 32768 bind 32768)
[    0.287182] TCP: reno registered
[    0.287190] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.287211] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.287303] NET: Registered protocol family 1
[    0.287320] pci 0000:00:02.0: Video device with shadowed ROM
[    0.320377] PCI: CLS 64 bytes, default 64
[    0.320431] Unpacking initramfs...
[    0.364667] pci 0000:03:00.0: no hotplug settings from platform
[    0.364681] pci 0000:03:00.1: no hotplug settings from platform
[    0.667692] Freeing initrd memory: 14132K (ffff880036456000 - ffff880037223000)
[    0.667706] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.667709] software IO TLB [mem 0x9b1c0000-0x9f1c0000] (64MB) mapped at [ffff88009b1c0000-ffff88009f1bffff]
[    0.667755] Simple Boot Flag at 0x44 set to 0x1
[    0.668052] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.668134] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[    0.668143] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[    0.668155] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[    0.668164] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[    0.668229] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.668651] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.668696] audit: initializing netlink subsys (disabled)
[    0.668716] audit: type=2000 audit(1425926586.652:1): initialized
[    0.669197] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.669221] zbud: loaded
[    0.669471] VFS: Disk quotas dquot_6.5.2
[    0.669492] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.669558] msgmni has been set to 7557
[    0.669978] alg: No test for stdrng (krng)
[    0.670012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.670080] io scheduler noop registered
[    0.670085] io scheduler deadline registered
[    0.670134] io scheduler cfq registered (default)
[    0.670207] pcieport 0000:00:1c.0: device [8086:1e10] has invalid IRQ; check vendor BIOS
[    0.670401] pcieport 0000:00:1c.1: device [8086:1e12] has invalid IRQ; check vendor BIOS
[    0.670543] pcieport 0000:00:1c.2: device [8086:1e14] has invalid IRQ; check vendor BIOS
[    0.670767] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.670787] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.670862] simple-framebuffer simple-framebuffer.0: framebuffer at 0xb0000000, 0x408000 bytes, mapped to 0xffffc90010800000
[    0.670865] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1366x768x32, linelength=5504
[    0.674507] Console: switching to colour frame buffer device 170x48
[    0.677935] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.677946] intel_idle: MWAIT substates: 0x21120
[    0.677948] intel_idle: v0.4 model 0x3A
[    0.677949] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.678213] GHES: HEST is not enabled!
[    0.678309] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.678824] Linux agpgart interface v0.103
[    0.678973] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.680364] i8042: Detected active multiplexing controller, rev 1.1
[    0.681037] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.681042] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.681074] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.681100] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.681126] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.681344] mousedev: PS/2 mouse device common for all mice
[    0.681399] rtc_cmos 00:01: RTC can wake from S4
[    0.681580] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.681611] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.681624] Intel P-state driver initializing.
[    0.681635] Intel pstate controlling: cpu 0
[    0.681663] Intel pstate controlling: cpu 1
[    0.681746] Intel pstate controlling: cpu 2
[    0.681819] Intel pstate controlling: cpu 3
[    0.681902] ledtrig-cpu: registered to indicate activity on CPUs
[    0.682666] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.682668] AMD IOMMUv2 functionality not available on this system
[    0.682899] TCP: cubic registered
[    0.683082] NET: Registered protocol family 10
[    0.683579] mip6: Mobile IPv6
[    0.683587] NET: Registered protocol family 17
[    0.683601] mpls_gso: MPLS GSO support
[    0.684460] registered taskstats version 1
[    0.685495] rtc_cmos 00:01: setting system clock to 2015-03-09 18:43:07 UTC (1425926587)
[    0.685815] PM: Hibernation image not present or could not be loaded.
[    0.687730] Freeing unused kernel memory: 1200K (ffffffff818ed000 - ffffffff81a19000)
[    0.687734] Write protecting the kernel read-only data: 8192k
[    0.692849] Freeing unused kernel memory: 932K (ffff880001717000 - ffff880001800000)
[    0.694029] Freeing unused kernel memory: 220K (ffff8800019c9000 - ffff880001a00000)
[    0.703166] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.717264] systemd-udevd[69]: starting version 215
[    0.717804] random: systemd-udevd urandom read with 4 bits of entropy available
[    0.743805] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
[    0.744013] rtsx_pci 0000:03:00.0: irq 40 for MSI/MSI-X
[    0.744044] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 40
[    0.744767] thermal LNXTHERM:00: registered as thermal_zone0
[    0.744773] ACPI: Thermal Zone [THRM] (56 C)
[    0.745124] ACPI: bus type USB registered
[    0.745165] usbcore: registered new interface driver usbfs
[    0.745182] usbcore: registered new interface driver hub
[    0.745397] usbcore: registered new device driver usb
[    0.747008] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.747273] sdhci: Secure Digital Host Controller Interface driver
[    0.747277] sdhci: Copyright(c) Pierre Ossman
[    0.747472] ehci-pci: EHCI PCI platform driver
[    0.747755] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.747770] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.747797] ehci-pci 0000:00:1a.0: debug port 2
[    0.748940] SCSI subsystem initialized
[    0.749648] pps_core: LinuxPPS API ver. 1 registered
[    0.749652] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.750183] PTP clock support registered
[    0.751725] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.751755] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc2619000
[    0.752012] libata version 3.00 loaded.
[    0.752266] sdhci-pci 0000:03:00.1: SDHCI controller found [10ec:5209] (rev 1)
[    0.752284] sdhci-pci 0000:03:00.1: enabling device (0000 -> 0002)
[    0.752408] sdhci-pci 0000:03:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    0.752418] mmc0: no vqmmc regulator found
[    0.752420] mmc0: no vmmc regulator found
[    0.752427] sdhci-pci 0000:03:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    0.752823] tg3.c:v3.137 (May 11, 2014)
[    0.753462] mmc0: SDHCI controller on PCI [0000:03:00.1] using DMA
[    0.760085] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.760193] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.760199] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.760203] usb usb1: Product: EHCI Host Controller
[    0.760207] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.760211] usb usb1: SerialNumber: 0000:00:1a.0
[    0.760675] hub 1-0:1.0: USB hub found
[    0.760695] hub 1-0:1.0: 2 ports detected
[    0.761207] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.761219] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.761242] ehci-pci 0000:00:1d.0: debug port 2
[    0.763597] libphy: tg3 mdio bus: probed
[    0.765149] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.765407] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc2618000
[    0.776071] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.776202] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.776206] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.776209] usb usb2: Product: EHCI Host Controller
[    0.776211] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.776214] usb usb2: SerialNumber: 0000:00:1d.0
[    0.776417] hub 2-0:1.0: USB hub found
[    0.776436] hub 2-0:1.0: 2 ports detected
[    0.776837] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.776850] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.776985] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.777024] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    0.777283] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.777288] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.777293] usb usb3: Product: xHCI Host Controller
[    0.777296] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.777299] usb usb3: SerialNumber: 0000:00:14.0
[    0.777662] hub 3-0:1.0: USB hub found
[    0.777683] hub 3-0:1.0: 4 ports detected
[    0.778036] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.778041] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.778154] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.778158] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.778160] usb usb4: Product: xHCI Host Controller
[    0.778163] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.778165] usb usb4: SerialNumber: 0000:00:14.0
[    0.778344] hub 4-0:1.0: USB hub found
[    0.778366] hub 4-0:1.0: 4 ports detected
[    0.778675] ahci 0000:00:1f.2: version 3.0
[    0.778854] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    0.792094] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode
[    0.792098] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.809166] scsi0 : ahci
[    0.809390] scsi1 : ahci
[    0.809551] scsi2 : ahci
[    0.809701] scsi3 : ahci
[    0.809852] scsi4 : ahci
[    0.810007] scsi5 : ahci
[    0.810090] ata1: SATA max UDMA/133 abar m2048@0xc2617000 port 0xc2617100 irq 42
[    0.810095] ata2: SATA max UDMA/133 abar m2048@0xc2617000 port 0xc2617180 irq 42
[    0.810098] ata3: DUMMY
[    0.810100] ata4: DUMMY
[    0.810102] ata5: DUMMY
[    0.810105] ata6: SATA max UDMA/133 abar m2048@0xc2617000 port 0xc2617380 irq 42
[    0.835070] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 08:9e:01:43:f2:eb
[    0.835076] tg3 0000:04:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=400:01)
[    0.835080] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    0.835083] tg3 0000:04:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.072069] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.128032] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.128070] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.128100] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.128751] ata2.00: ATA-8: SATA SSD, S5FAM018, max UDMA/100
[    1.128760] ata2.00: 39091248 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.128781] ata1.00: ATA-8: ST500LT012-9WS142, 0001SDM1, max UDMA/133
[    1.128787] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.129687] ata1.00: configured for UDMA/133
[    1.129711] ata2.00: configured for UDMA/100
[    1.129988] scsi 0:0:0:0: Direct-Access     ATA      ST500LT012-9WS14 SDM1 PQ: 0 ANSI: 5
[    1.130729] scsi 1:0:0:0: Direct-Access     ATA      SATA SSD         M018 PQ: 0 ANSI: 5
[    1.131394] ata6.00: ATAPI: HL-DT-ST DVDRAM GU61N, 2.00, max UDMA/133
[    1.132719] ata6.00: configured for UDMA/133
[    1.138726] scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GU61N     2.00 PQ: 0 ANSI: 5
[    1.154981] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.154988] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.155043] sd 1:0:0:0: [sdb] 39091248 512-byte logical blocks: (20.0 GB/18.6 GiB)
[    1.155053] sd 0:0:0:0: [sda] Write Protect is off
[    1.155058] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.155165] sd 1:0:0:0: [sdb] Write Protect is off
[    1.155171] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.155209] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.155952] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.156618] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.156689] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.156770] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    1.157415]  sdb: sdb1
[    1.157873] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.168357] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.168363] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.168565] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.204305] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.204310] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.204607] hub 1-1:1.0: USB hub found
[    1.204654] hub 1-1:1.0: 6 ports detected
[    1.208905]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    1.210014] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.315979] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.448484] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.448494] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.449112] hub 2-1:1.0: USB hub found
[    1.449262] hub 2-1:1.0: 8 ports detected
[    1.615957] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[    1.663828] tsc: Refined TSC clocksource calibration: 1795.920 MHz
[    1.751073] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b
[    1.751084] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.751089] usb 3-2: Product: USB Receiver
[    1.751096] usb 3-2: Manufacturer: Logitech
[    1.755298] hidraw: raw HID events driver (C) Jiri Kosina
[    1.763327] usbcore: registered new interface driver usbhid
[    1.763332] usbhid: USB HID core driver
[    1.767400] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
[    1.821432] input: Logitech Unifying Device. Wireless PID:401b as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input5
[    1.821721] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:401b] on usb-0000:00:14.0-2:1
[    1.823690] input: Logitech Unifying Device. Wireless PID:4016 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input6
[    1.823818] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4016] on usb-0000:00:14.0-2:2
[    1.823845] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    1.837665] PM: Starting manual resume from disk
[    1.837676] PM: Hibernation image partition 8:5 present
[    1.837679] PM: Looking for hibernation image.
[    1.838310] PM: Image not found (code -22)
[    1.838318] PM: Hibernation image not present or could not be loaded.
[    1.852338] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    1.960373] systemd[1]: RTC configured in localtime, applying delta of -180 minutes to system time.
[    1.975120] usb 1-1.1: New USB device found, idVendor=1bcf, idProduct=2c32
[    1.975126] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.975129] usb 1-1.1: Product: HD WebCam
[    1.975132] usb 1-1.1: Manufacturer: NC.21411.01123505CACLM0629
[    2.115778] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[    2.173207] lp: driver loaded but no devices found
[    2.175560] ppdev: user-space parallel port driver
[    2.184448] fuse init (API version 7.23)
[    2.201313] systemd-udevd[196]: starting version 215
[    2.209459] usb 1-1.3: string descriptor 0 read error: -22
[    2.209515] usb 1-1.3: New USB device found, idVendor=0489, idProduct=e04e
[    2.209519] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.313950] random: nonblocking pool is initialized
[    2.330704] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[    2.336061] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[    2.336071] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.336077] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[    2.336083] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.336085] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[    2.336090] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.336092] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[    2.336096] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.336097] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.340049] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[    2.340056] ACPI: Power Button [PWRB]
[    2.340109] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8
[    2.340112] ACPI: Sleep Button [SLPB]
[    2.340163] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
[    2.340199] ACPI: Lid Switch [LID]
[    2.340259] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input10
[    2.340262] ACPI: Power Button [PWRF]
[    2.343724] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.345699] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[    2.346208] ACPI: AC Adapter [ACAD] (on-line)
[    2.351134] wmi: Mapper loaded
[    2.358882] ACPI: Battery Slot [BAT1] (battery present)
[    2.362429] [drm] Initialized drm 1.1.0 20060810
[    2.368367] ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305f conflicts with OpRegion 0x0000000000003040-0x000000000000304f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[    2.368378] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.527624] ata2: failed to read log page 10h (errno=-5)
[    2.527705] ata2.00: exception Emask 0x1 SAct 0x1ffe00 SErr 0x0 action 0x0
[    2.527784] ata2.00: irq_stat 0x40000001
[    2.527836] ata2.00: failed command: READ FPDMA QUEUED
[    2.527904] ata2.00: cmd 60/38:48:f0:9d:09/00:00:01:00:00/40 tag 9 ncq 28672 in
         res 51/04:78:b8:20:49/00:00:00:00:00/40 Emask 0x1 (device error)
[    2.528065] ata2.00: status: { DRDY ERR }
[    2.528114] ata2.00: error: { ABRT }
[    2.528160] ata2.00: failed command: READ FPDMA QUEUED
[    2.528227] ata2.00: cmd 60/08:50:d8:3d:81/00:00:00:00:00/40 tag 10 ncq 4096 in
         res 51/04:78:b8:20:49/00:00:00:00:00/40 Emask 0x1 (device error)
[    2.528386] ata2.00: status: { DRDY ERR }
[    2.528435] ata2.00: error: { ABRT }
[    2.528480] ata2.00: failed command: READ FPDMA QUEUED
[    2.528546] ata2.00: cmd 60/00:58:a8:c2:f2/02:00:00:00:00/40 tag 11 ncq 262144 in
         res 51/04:78:b8:20:49/00:00:00:00:00/40 Emask 0x1 (device error)
[    2.528707] ata2.00: status: { DRDY ERR }
[    2.528755] ata2.00: error: { ABRT }
[    2.528800] ata2.00: failed command: READ FPDMA QUEUED
[    2.528866] ata2.00: cmd 60/b8:60:b8:9a:f6/01:00:00:00:00/40 tag 12 ncq 225280 in
         res 51/04:78:b8:20:49/00:00:00:00:00/40 Emask 0x1 (device error)
[    2.529027] ata2.00: status: { DRDY ERR }
[    2.529076] ata2.00: error: { ABRT }
[    2.529122] ata2.00: failed command: READ FPDMA QUEUED
[    2.529188] ata2.00: cmd 60/08:68:d8:39:81/00:00:00:00:00/40 tag 13 ncq 4096 in
         res 51/04:78:b8:20:49/00:00:00:00:00/40 Emask 0x1 (device error)
[    2.529347] ata2.00: status: { DRDY ERR }
[    2.529395] ata2.00: error: { ABRT }
[    2.529440] ata2.00: failed command: READ FPDMA QUEUED
[    2.529506] ata2.00: cmd 60/a0:70:18:20:49/00:00:00:00:00/40 tag 14 ncq 81920 in
         res 51/04:78:b8:20:49/00:00:00:00:00/40 Emask 0x1 (device error)
[    2.529667] ata2.00: status: { DRDY ERR }
[    2.529715] ata2.00: error: { ABRT }
[    2.529759] ata2.00: failed command: READ FPDMA QUEUED
[    2.529826] ata2.00: cmd 60/08:78:b8:20:49/00:00:00:00:00/40 tag 15 ncq 4096 in
         res 51/04:78:b8:20:49/00:00:00:00:00/40 Emask 0x1 (device error)
[    2.529985] ata2.00: status: { DRDY ERR }
[    2.530033] ata2.00: error: { ABRT }
[    2.530078] ata2.00: failed command: READ FPDMA QUEUED
[    2.530143] ata2.00: cmd 60/20:80:38:84:47/00:00:01:00:00/40 tag 16 ncq 16384 in
         res 51/04:78:b8:20:49/00:00:00:00:00/40 Emask 0x1 (device error)
[    2.530304] ata2.00: status: { DRDY ERR }
[    2.530352] ata2.00: error: { ABRT }
[    2.530397] ata2.00: failed command: READ FPDMA QUEUED
[    2.530463] ata2.00: cmd 60/08:88:58:28:44/00:00:01:00:00/40 tag 17 ncq 4096 in
         res 51/04:78:b8:20:49/00:00:00:00:00/40 Emask 0x1 (device error)
[    2.535536] ata2.00: status: { DRDY ERR }
[    2.538015] ata2.00: error: { ABRT }
[    2.540453] ata2.00: failed command: READ FPDMA QUEUED
[    2.542631] ata2.00: cmd 60/00:90:e8:f5:48/01:00:00:00:00/40 tag 18 ncq 131072 in
         res 51/04:78:b8:20:49/00:00:00:00:00/40 Emask 0x1 (device error)
[    2.547004] ata2.00: status: { DRDY ERR }
[    2.549189] ata2.00: error: { ABRT }
[    2.551331] ata2.00: failed command: READ FPDMA QUEUED
[    2.553475] ata2.00: cmd 60/08:98:00:19:01/00:00:01:00:00/40 tag 19 ncq 4096 in
         res 51/04:78:b8:20:49/00:00:00:00:00/40 Emask 0x1 (device error)
[    2.557441] ata2.00: status: { DRDY ERR }
[    2.559411] ata2.00: error: { ABRT }
[    2.561367] ata2.00: failed command: READ FPDMA QUEUED
[    2.563304] ata2.00: cmd 60/20:a0:68:84:47/00:00:01:00:00/40 tag 20 ncq 16384 in
         res 51/04:78:b8:20:49/00:00:00:00:00/40 Emask 0x1 (device error)
[    2.567292] ata2.00: status: { DRDY ERR }
[    2.569123] ata2.00: error: { ABRT }
[    2.663656] Switched to clocksource tsc
[    7.565938] ata2.00: qc timeout (cmd 0xec)
[    7.565954] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[    7.565958] ata2.00: revalidation failed (errno=-5)
[    7.568388] ata2: hard resetting link
[    7.885860] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.887234] ata2.00: configured for UDMA/100
[    7.887267] ata2: EH complete
[    8.049940] ata2: failed to read log page 10h (errno=-5)
[    8.052428] ata2.00: exception Emask 0x1 SAct 0x3ffe SErr 0x0 action 0x0
[    8.054925] ata2.00: irq_stat 0x40000001
[    8.057356] ata2.00: failed command: READ FPDMA QUEUED
[    8.059796] ata2.00: cmd 60/38:08:f0:9d:09/00:00:01:00:00/40 tag 1 ncq 28672 in
         res 51/04:48:e0:39:81/00:00:00:00:00/40 Emask 0x1 (device error)
[    8.064766] ata2.00: status: { DRDY ERR }
[    8.067071] ata2.00: error: { ABRT }
[    8.069271] ata2.00: failed command: WRITE FPDMA QUEUED
[    8.071447] ata2.00: cmd 61/08:10:00:08:04/00:00:01:00:00/40 tag 2 ncq 4096 out
         res 51/04:48:e0:39:81/00:00:00:00:00/40 Emask 0x1 (device error)
[    8.075899] ata2.00: status: { DRDY ERR }
[    8.078121] ata2.00: error: { ABRT }
[    8.080116] ata2.00: failed command: READ FPDMA QUEUED
[    8.082093] ata2.00: cmd 60/08:18:18:19:01/00:00:01:00:00/40 tag 3 ncq 4096 in
         res 51/04:48:e0:39:81/00:00:00:00:00/40 Emask 0x1 (device error)
[    8.086137] ata2.00: status: { DRDY ERR }
[    8.088151] ata2.00: error: { ABRT }
[    8.090161] ata2.00: failed command: READ FPDMA QUEUED
[    8.091999] ata2.00: cmd 60/28:20:88:84:47/00:00:01:00:00/40 tag 4 ncq 20480 in
         res 51/04:48:e0:39:81/00:00:00:00:00/40 Emask 0x1 (device error)
[    8.095727] ata2.00: status: { DRDY ERR }
[    8.097584] ata2.00: error: { ABRT }
[    8.099422] ata2.00: failed command: READ FPDMA QUEUED
[    8.101249] ata2.00: cmd 60/08:28:28:19:01/00:00:01:00:00/40 tag 5 ncq 4096 in
         res 51/04:48:e0:39:81/00:00:00:00:00/40 Emask 0x1 (device error)
[    8.104998] ata2.00: status: { DRDY ERR }
[    8.106735] ata2.00: error: { ABRT }
[    8.108427] ata2.00: failed command: READ FPDMA QUEUED
[    8.110121] ata2.00: cmd 60/08:30:78:3e:81/00:00:00:00:00/40 tag 6 ncq 4096 in
         res 51/04:48:e0:39:81/00:00:00:00:00/40 Emask 0x1 (device error)
[    8.113570] ata2.00: status: { DRDY ERR }
[    8.115291] ata2.00: error: { ABRT }
[    8.116878] ata2.00: failed command: READ FPDMA QUEUED
[    8.118445] ata2.00: cmd 60/00:38:a8:c4:f2/01:00:00:00:00/40 tag 7 ncq 131072 in
         res 51/04:48:e0:39:81/00:00:00:00:00/40 Emask 0x1 (device error)
[    8.121649] ata2.00: status: { DRDY ERR }
[    8.123248] ata2.00: error: { ABRT }
[    8.124823] ata2.00: failed command: READ FPDMA QUEUED
[    8.126402] ata2.00: cmd 60/00:40:a8:c5:f2/01:00:00:00:00/40 tag 8 ncq 131072 in
         res 51/04:48:e0:39:81/00:00:00:00:00/40 Emask 0x1 (device error)
[    8.129407] ata2.00: status: { DRDY ERR }
[    8.130893] ata2.00: error: { ABRT }
[    8.132358] ata2.00: failed command: READ FPDMA QUEUED
[    8.133819] ata2.00: cmd 60/08:48:e0:39:81/00:00:00:00:00/40 tag 9 ncq 4096 in
         res 51/04:48:e0:39:81/00:00:00:00:00/40 Emask 0x1 (device error)
[    8.136793] ata2.00: status: { DRDY ERR }
[    8.138282] ata2.00: error: { ABRT }
[    8.139669] ata2.00: failed command: READ FPDMA QUEUED
[    8.141041] ata2.00: cmd 60/10:50:58:84:47/00:00:01:00:00/40 tag 10 ncq 8192 in
         res 51/04:48:e0:39:81/00:00:00:00:00/40 Emask 0x1 (device error)
[    8.143814] ata2.00: status: { DRDY ERR }
[    8.145196] ata2.00: error: { ABRT }
[    8.146564] ata2.00: failed command: READ FPDMA QUEUED
[    8.147922] ata2.00: cmd 60/08:58:68:85:47/00:00:01:00:00/40 tag 11 ncq 4096 in
         res 51/04:48:e0:39:81/00:00:00:00:00/40 Emask 0x1 (device error)
[    8.150711] ata2.00: status: { DRDY ERR }
[    8.152027] ata2.00: error: { ABRT }
[    8.153311] ata2.00: failed command: READ FPDMA QUEUED
[    8.154596] ata2.00: cmd 60/00:60:f8:10:49/01:00:00:00:00/40 tag 12 ncq 131072 in
         res 51/04:48:e0:39:81/00:00:00:00:00/40 Emask 0x1 (device error)
[    8.157214] ata2.00: status: { DRDY ERR }
[    8.158520] ata2.00: error: { ABRT }
[    8.159807] ata2.00: failed command: READ FPDMA QUEUED
[    8.161085] ata2.00: cmd 60/68:68:80:c5:09/00:00:01:00:00/40 tag 13 ncq 53248 in
         res 51/04:48:e0:39:81/00:00:00:00:00/40 Emask 0x1 (device error)
[    8.163707] ata2.00: status: { DRDY ERR }
[    8.164955] ata2.00: error: { ABRT }
[   13.164157] ata2.00: qc timeout (cmd 0xec)
[   13.164175] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[   13.164182] ata2.00: revalidation failed (errno=-5)
[   13.169499] ata2: hard resetting link
[   13.488081] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   13.489732] ata2.00: configured for UDMA/100
[   13.489778] ata2: EH complete
[   13.648359] ata2.00: exception Emask 0x0 SAct 0x7c000001 SErr 0x0 action 0x0
[   13.653265] ata2.00: irq_stat 0x40000008
[   13.657507] ata2.00: failed command: READ FPDMA QUEUED
[   13.661122] ata2.00: cmd 60/38:d0:f0:9d:09/00:00:01:00:00/40 tag 26 ncq 28672 in
         res 41/40:38:f0:9d:09/00:00:01:00:00/00 Emask 0x409 (media error) <F>
[   13.666815] ata2.00: status: { DRDY ERR }
[   13.669450] ata2.00: error: { UNC }
[   13.673672] ata2.00: configured for UDMA/100
[   13.673708] sd 1:0:0:0: [sdb] Unhandled sense code
[   13.673713] sd 1:0:0:0: [sdb]  
[   13.673715] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   13.673718] sd 1:0:0:0: [sdb]  
[   13.673721] Sense Key : Medium Error [current] [descriptor]
[   13.673726] Descriptor sense data with sense descriptors (in hex):
[   13.673728]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[   13.673740]         01 09 9d f0 
[   13.673747] sd 1:0:0:0: [sdb]  
[   13.673750] Add. Sense: Unrecovered read error - auto reallocate failed
[   13.673753] sd 1:0:0:0: [sdb] CDB: 
[   13.673756] Read(10): 28 00 01 09 9d f0 00 00 38 00
[   13.673767] end_request: I/O error, dev sdb, sector 17407472
[   13.676158] ata2: EH complete
[   13.679033] EFI Variables Facility v0.08 2004-May-17
[   13.679942] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   13.696103] ata2.00: exception Emask 0x0 SAct 0x78000003 SErr 0x0 action 0x0
[   13.698677] ata2.00: irq_stat 0x40000008
[   13.701238] ata2.00: failed command: READ FPDMA QUEUED
[   13.703629] ata2.00: cmd 60/08:d8:f0:9d:09/00:00:01:00:00/40 tag 27 ncq 4096 in
         res 41/40:08:f0:9d:09/00:00:01:00:00/00 Emask 0x409 (media error) <F>
[   13.708156] ata2.00: status: { DRDY ERR }
[   13.710400] ata2.00: error: { UNC }
[   13.713854] ata2.00: configured for UDMA/100
[   13.713884] sd 1:0:0:0: [sdb] Unhandled sense code
[   13.713888] sd 1:0:0:0: [sdb]  
[   13.713891] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   13.713894] sd 1:0:0:0: [sdb]  
[   13.713897] Sense Key : Medium Error [current] [descriptor]
[   13.713902] Descriptor sense data with sense descriptors (in hex):
[   13.713904]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[   13.713918]         01 09 9d f0 
[   13.713924] sd 1:0:0:0: [sdb]  
[   13.713928] Add. Sense: Unrecovered read error - auto reallocate failed
[   13.713931] sd 1:0:0:0: [sdb] CDB: 
[   13.713933] Read(10): 28 00 01 09 9d f0 00 00 08 00
[   13.713944] end_request: I/O error, dev sdb, sector 17407472
[   13.715554] ata2: EH complete
[   13.716177] input: PC Speaker as /devices/platform/pcspkr/input/input11
[   13.731726] pstore: Registered efi as persistent store backend
[   13.735408] [drm] Memory usable by graphics device = 2048M
[   13.735415] checking generic (b0000000 408000) vs hw (b0000000 10000000)
[   13.735417] fb: switching to inteldrmfb from simple
[   13.735466] Console: switching to colour dummy device 80x25
[   13.735556] [drm] Replacing VGA console driver
[   13.738590] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   13.738595] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.738597] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   13.738599] sound hdaudioC0D0:    mono: mono_out=0x0
[   13.738601] sound hdaudioC0D0:    inputs:
[   13.738603] sound hdaudioC0D0:      Mic=0x12
[   13.752996] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   13.753878] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   13.760424] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[   13.760444] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.760446] [drm] Driver supports precise vblank timestamp query.
[   13.760592] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   13.761295] cfg80211: Calling CRDA to update world regulatory domain
[   13.768128] media: Linux media interface: v0.10
[   13.774817] Linux video capture interface: v2.00
[   13.783443] alg: No test for crc32 (crc32-pclmul)
[   13.800823] [drm] VBT doesn't support DRRS
[   13.801636] Bluetooth: Core ver 2.19
[   13.801962] NET: Registered protocol family 31
[   13.801965] Bluetooth: HCI device and connection manager initialized
[   13.801973] Bluetooth: HCI socket layer initialized
[   13.801977] Bluetooth: L2CAP socket layer initialized
[   13.801990] Bluetooth: SCO socket layer initialized
[   13.803121] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c32)
[   13.810807] ath: phy0: ASPM enabled: 0x42
[   13.810813] ath: EEPROM regdomain: 0x6c
[   13.810815] ath: EEPROM indicates we should expect a direct regpair map
[   13.810819] ath: Country alpha2 being used: 00
[   13.810821] ath: Regpair used: 0x6c
[   13.811567] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input16
[   13.811650] usbcore: registered new interface driver uvcvideo
[   13.811652] USB Video Class driver (1.1.1)
[   13.814226] intel_rapl: RAPL domain dram detection failed
[   13.816200] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.816593] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90010d00000, irq=19
[   13.818347] usbcore: registered new interface driver btusb
[   13.819284] usbcore: registered new interface driver ath3k
[   13.820882] iTCO_vendor_support: vendor-support=0
[   13.821610] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   13.821649] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   13.821761] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.826857] acer_wmi: Acer Laptop ACPI-WMI Extras
[   13.826986] acer_wmi: Function bitmap for Communication Button: 0x801
[   13.827129] acer_wmi: Brightness must be controlled by acpi video driver
[   13.840931] input: Acer WMI hotkeys as /devices/virtual/input/input17
[   13.841464] input: Acer BMA150 accelerometer as /devices/virtual/input/input18
[   13.883896] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[   13.889302] cfg80211: World regulatory domain updated:
[   13.889306] cfg80211:  DFS Master region: unset
[   13.889308] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   13.889312] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.889315] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.889318] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   13.889321] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   13.889325] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   13.889328] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   13.889331] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   13.889334] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   13.900874] fbcon: inteldrmfb (fb0) is primary device
[   14.122203] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[   14.309278] psmouse serio2: elantech: assuming hardware version 4 (with firmware version 0x461f08)
[   14.321771] psmouse serio2: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0e.
[   14.384720] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input13
[   14.572036] [drm:intel_dp_start_link_train] *ERROR* too many voltage retries, give up
[   14.823959] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[   14.880313] Console: switching to colour frame buffer device 170x48
[   14.887004] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   14.887006] i915 0000:00:02.0: registered panic notifier
[   14.916386] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   14.916587] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21
[   14.916765] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   14.962842] Adding 3999740k swap on /dev/sda5.  Priority:-1 extents:1 across:3999740k FS
[   15.022374] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   15.272413] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   15.331157] systemd-journald[174]: Received request to flush runtime journal from PID 1
[   15.479622] RPC: Registered named UNIX socket transport module.
[   15.479627] RPC: Registered udp transport module.
[   15.479629] RPC: Registered tcp transport module.
[   15.479631] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.483398] FS-Cache: Loaded
[   15.491355] FS-Cache: Netfs 'nfs' registered for caching
[   15.500184] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   15.741759] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.741764] Bluetooth: BNEP filters: protocol multicast
[   15.741774] Bluetooth: BNEP socket layer initialized
[   16.004039] tg3 0000:04:00.0: irq 46 for MSI/MSI-X
[   16.015280] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.028255] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.819366] [drm:intel_dp_start_link_train] *ERROR* too many voltage retries, give up
[   16.828100] tg3 0000:04:00.0 eth0: Link is down
[   19.603693] wlan0: authenticate with 1c:af:f7:d1:68:5b
[   19.609538] wlan0: send auth to 1c:af:f7:d1:68:5b (try 1/3)
[   19.714116] wlan0: send auth to 1c:af:f7:d1:68:5b (try 2/3)
[   19.793281] wlan0: authenticated
[   19.793743] ath9k 0000:09:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   19.794071] wlan0: associate with 1c:af:f7:d1:68:5b (try 1/3)
[   19.934083] wlan0: associate with 1c:af:f7:d1:68:5b (try 2/3)
[   20.038021] wlan0: associate with 1c:af:f7:d1:68:5b (try 3/3)
[   20.141978] wlan0: association with 1c:af:f7:d1:68:5b timed out
[   23.661846] wlan0: authenticate with 1c:af:f7:d1:68:5b
[   23.668306] wlan0: send auth to 1c:af:f7:d1:68:5b (try 1/3)
[   23.670381] wlan0: authenticated
[   23.670562] ath9k 0000:09:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   23.673026] wlan0: associate with 1c:af:f7:d1:68:5b (try 1/3)
[   23.676900] wlan0: RX AssocResp from 1c:af:f7:d1:68:5b (capab=0x431 status=0 aid=2)
[   23.676960] wlan0: associated
[   23.676990] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   98.164888] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)

 

 

Edited by Mgbu
Link to comment
Share on other sites

9 answers to this question

Recommended Posts

  • 0

Sinceramente yo volvería a meter la opción "quiet" porque joé, qué de cosas :sweat:

 

No está demás comprobar si de verdad es el disco, así que mete smarmontools y arreando que es gerundio:

 

 

smartctl -i /dev/sda

(O el disco que sea)

 

Si soporta SMART y  está habilitado, veamos que tal está de salud

 

smartctl -H /dev/sda

 

http://www.activasistemas.com/blog/2013/11/22/comprobando-la-salud-de-los-discos-duros-en-un-sistema-linux/

Link to comment
Share on other sites

  • 0

Después pruebo, me tengo que ir

Decis de poner "quiet" para no ver los mensajes mientras se prende? para mi ver como pasan los textos es la mejor animacion de bienvenida que hay :D

Link to comment
Share on other sites

  • 0

Acá está la salida para los dos discos duros:

 

 

 

mbernardi@debianmartin:~$ sudo smartctl -i /dev/sda
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Laptop Thin HDD
Device Model:     ST500LT012-9WS142
Serial Number:    W0V214JQ
LU WWN Device Id: 5 000c50 05c403cf3
Firmware Version: 0001SDM1
User Capacity:    500.107.862.016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Mar 10 19:49:35 2015 ART
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

mbernardi@debianmartin:~$ sudo smartctl -i /dev/sdb
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     SATA SSD
Serial Number:    86F807260E0800164645
Firmware Version: S5FAM018
User Capacity:    20.014.718.976 bytes [20,0 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      < 1.8 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Tue Mar 10 19:49:57 2015 ART
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

 

 

El otro disco duro es un SSD de 20GB que vino escondido en la notebook, creo que era usado para la hibernación de Windows, así que ahora que lo pienso es probable que se esté dañando por darle un uso "raro". Pero por la salida de dmesg no puedo saber si el problema está en el HDD o el SSD

 

Según veo los dos pasan el chequeo médico test de smartctl:

 

 

mbernardi@debianmartin:~$ sudo smartctl -H /dev/sda
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

mbernardi@debianmartin:~$ sudo smartctl -H /dev/sdb
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

 

 

 

Así que parece que el disco duro está bien, ahora voy a desactivar NCQ (Native Command Queuing) y cuento

EDIT: Desactivé NCQ en los dos y no cambió nada. Asi que lo activo de nuevo

 

Los errores no me molestan visualmente, sí tarda un poco más en iniciar. Además van dos veces que prendo y no me anda el WiFi y tengo que reiniciar, pero no se si tiene relación

Edited by Mgbu
Link to comment
Share on other sites

  • 0

Recién cuando prendí no me anduvo el WiFi ni el sonido, reinicié y volvió a andar. Eso me pasó ya varias veces

 

Ahora que veo el dmesg tengo un error de I/O:

[    8.232066] end_request: I/O error, dev sdb, sector 17407472

sdb es el SSD de 20GB en donde tengo instalado debian

 

El test de salud de "smartctl -H /dev/sdb" me da bien

 

¿Está muriendo el SSD o necesita un formateo? De todos nodos el SSD no es taaaaaan importante, tengo el HDD de 500GB

Link to comment
Share on other sites

  • 0

Si tienes tiempo reinstala Windows 8 dejando el ssd para el. Y luego reinstala el grub desde el livecd de Linux Mint. Badblocks tarda mínimo 7 horas en analizar 500 GB, bueno depende de la máquina, claro.

Link to comment
Share on other sites

  • 0

@@Pepegnu No entiendo para que debería mover Windows 8 al SSD, porque el problema es justamente el SSD

 

Ahí pasé el test, da 8 bloques dañados, ninguno es el que me tiraba el dmesg pero bueno

Revisando los bloques dañados en modo lectura-escritura no destructivo
Del bloque 0 al 19545623
Revisando los bloques dañados (prueba de lectura-escritura no destructiva)
Probando con un patrón aleatorio: 8703736 done, 24:04 elapsed. (0/0/0 errors)
8703737
8703738
8703739 done, 24:05 elapsed. (3/0/0 errors)
8703740
8703741
8703742
8703743
Kdone                                                 
Pass completed, 8 bad blocks found. (8/0/0 errors)

Ahora no se que hacer jaja, voy a ir viendo si se siguen dañando bloques nuevos

 

No hay forma para que debian me deje de hinchar con el error "failed command: READ FPDMA QUEUED"?

Porque me hace el inicio más lento

Edited by Mgbu
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...